Description

HYUNDAI HIMC12: HIMC Series Three-Pole Magnetic Contactor Product Description

Brand and Product Identification

The HYUNDAI HIMC12 is a three-pole magnetic contactor manufactured by Hyundai Heavy Industries, belonging to the HIMC series of low-voltage industrial switching devices. The HIMC prefix identifies the Hyundai industrial magnetic contactor product line, and 12 denotes the 12 A AC-3 rated current frame. Produced in South Korea, the contactor is engineered for reliable performance in industrial automation, marine electrical and power distribution systems, with standard variants carrying auxiliary contact configurations such as the 11NR coding for 1NO+1NC auxiliary poles.

Product Function and System Role

The HIMC12 switches and isolates three-phase power circuits when its control coil is energized. The main normally open contacts close to connect motors, lighting loads, capacitor banks or other industrial loads to the supply, and de-energizing the coil opens the contacts to stop or isolate the load. The contactor can be controlled by PLC outputs, pushbuttons, control relays, motor protection devices or automation signals. It is a power switching contactor, not a motor-protective circuit breaker, overload relay, soft starter, variable frequency drive, PLC or disconnect switch by itself.

Main Circuit Ratings

The contactor has three main normally open poles. Rated insulation voltage Ui is 750 V AC, and rated impulse withstand voltage Uimp is 6 kV. Conventional free-air thermal current Ith is 20 A at ambient temperatures up to 40 degrees Celsius. AC-3 rated operational current is 12 A at 380 V to 400 V, corresponding to approximately 5.5 kW three-phase motor power at 400 V. AC-1 rated operational current is 20 A at 690 V for resistive and slightly inductive loads. The device is rated for AC-3 motor switching duty and AC-1 general-purpose load switching per IEC utilization categories.

Control Coil Specifications

The HIMC12 is offered with multiple AC coil voltage options to match different control systems. Common variants include 110 V 50 Hz / 120 V 60 Hz and 220 V 50 Hz / 240 V 60 Hz coils, all supporting 50/60 Hz dual-frequency operation for worldwide compatibility. The coil is designed for stable pull-in and holding performance within the rated control voltage tolerance range, and is suitable for both local pushbutton control and PLC-driven automation circuits.

Auxiliary Contacts

Standard HIMC12 configurations include built-in mechanically linked auxiliary contacts, typically 1 normally open and 1 normally closed (1NO+1NC) as referenced in 11NR variant coding. Auxiliary contacts are used for control feedback, electrical interlocking, status indication or relay logic circuits, and their ratings comply with IEC 60947-5-1 for AC-15 and DC-13 utilization categories. The auxiliary contact mechanism follows the main contact state for reliable position signaling.

Mechanical Construction and Wiring

The contactor uses a compact, robust housing with screw terminal connections for both main and control circuits. Main terminals accept copper conductors up to AWG 12 (75°C Cu), with a recommended tightening torque of 2.3 N·m (23 kg-cm). It supports both 35 mm DIN rail mounting and panel screw mounting for flexible integration into control cabinets and motor starter assemblies. Net weight is approximately 330 to 360 grams depending on the specific variant.

Standards and Compliance

The HIMC12 complies with IEC 60947-4-1, EN 60947-4-1, VDE 0660 and Korean KS C4504 standards for low-voltage contactors and motor switching equipment. It is suitable for industrial, commercial and marine electrical installations where corresponding safety and performance requirements apply.

Typical Application Scenarios

Typical applications include three-phase direct-on-line motor starters for pumps, fans, compressors, conveyors, small machine tools and packaging equipment; lighting load distribution and switching; power factor correction capacitor bank control; industrial automation panels; marine electrical systems; and low-voltage motor control centers. The contactor is commonly paired with a thermal overload relay to form a coordinated motor starter with overload protection.

Installation and Wiring Notes

Installation should follow the Hyundai HIMC series contactor documentation, IEC 60947-4-1 motor starter standards and local electrical codes. Mount the contactor on DIN rail or panel, connect supply and load conductors to the main terminals, wire the control coil to the specified voltage, and connect auxiliary contacts for feedback or interlocking circuits as required. Verify contactor rating against motor full-load current, coordinate with upstream protection devices, and confirm terminal torque, conductor size and load type before energizing.

Advantages and Selection Notes

The HIMC12 offers three-pole main contacts, 20 A AC-1 and 12 A AC-3 current ratings, 5.5 kW motor power capability at 400 V, multiple AC coil voltage options, 1NO+1NC built-in auxiliary contacts, screw terminal connections, compact form factor, light weight and compliance with international and Korean industrial standards. When selecting a replacement, confirm pole count, main and auxiliary contact configuration, utilization category rating, coil control voltage, terminal type and overload relay compatibility. The HIMC12 is a magnetic power contactor, not a circuit breaker, overload relay, soft starter, drive, PLC or sensor; its role is to switch and control three-phase motor and industrial loads under control circuit command.


Get a Quote