Description

已思考

ELAN SSW-D-24: Safety Relay Module Product Description

Brand and Product Identification

The ELAN SSW-D-24, also referenced as Schmersal Elan SSW-D-24VDC, is a safety relay module for industrial machine safety circuits. The SSW prefix identifies the Elan or Schmersal safety switch relay module family, D identifies the DC supply version, and 24 identifies the 24 V DC operating design. Distributor records describe the device as an Elan Schmersal SSW-D-24VDC safety relay rated for 6 A at 250 V AC with a 24 V DC supply. The exact contact count, reset mode and safety category should be verified from the module label, wiring diagram or original Elan or Schmersal documentation before installation.

Product Function and System Role

The SSW-D-24 evaluates safety input devices such as emergency stop buttons, guard door switches, safety sensors or two-hand control devices and switches the safety contactor or load circuit through its safety output contacts. The relay monitors the safety circuit state, controls start or reset behavior, and opens its safety contacts when a safety input is activated or a fault is detected. It is a safety relay monitoring module, not a contactor, circuit breaker, PLC, safety switch sensor, light curtain, drive or power supply.

Electrical Ratings

Published distributor data lists operating supply as 24 V DC, maximum output or contact current of 6 A, and maximum contact voltage of 250 V AC. The SSW-D-24 is mounted in a control cabinet and wired between the safety input devices and the machine contactor or safety load circuit. Contact type, number of NO or NC safety contacts, auxiliary contacts, reset terminals and feedback circuit terminals depend on the specific SSW-D variant and must be confirmed against the module wiring diagram.

Safety Circuit Application

Typical safety relay functions include emergency stop monitoring, guard door monitoring, safety switch or sensor evaluation, contactor feedback monitoring and controlled reset. The relay provides the logic evaluation and output contact switching needed to remove hazardous machine motion when a safety device is triggered. Safety category, PL and SIL performance depend on the complete circuit, input devices, contactor redundancy, wiring architecture and the relay's certified configuration, not on the relay alone.

Wiring and Operation Notes

Installation must follow the safety relay wiring diagram, machine safety standards, input device specifications and local electrical codes. Connect the 24 V DC supply, safety input channels, start or reset circuit, feedback circuit if required, and safety output contacts to the contactor coils or safety load. Verify reset type, contactor feedback wiring, contact monitoring and input device contacts before energizing. Test emergency stop actuation, door opening, reset behavior, contactor feedback detection and safety contact drop-out before placing the machine in service.

Typical Application Scenarios

Typical applications include emergency stop relays on conveyors, packaging machines, machine tools, presses, robotic cells, assembly lines, injection molding machines, woodworking equipment and material handling systems. The module can be used with hardwired emergency stops, guard door switches, magnetic safety sensors or other safety devices that provide dry contacts to the relay input.

Advantages and Selection Notes

The SSW-D-24 provides a compact 24 V DC safety relay for switching and monitoring machine safety circuits, with a listed 6 A contact rating at 250 V AC according to distributor data. When selecting a replacement, confirm supply voltage, safety contact configuration, auxiliary contacts, reset mode, feedback requirement, input device type, safety category and original Elan or Schmersal documentation. The SSW-D-24 is a safety relay module, not a contactor, overload relay, sensor, PLC, drive or circuit breaker; its role is to evaluate safety inputs and switch the machine safety output circuit in an industrial control panel.


Get a Quote