1. Product Overview

2. Main Features

• Modular integrated design, compact structure and easy installation

• Multi-channel analog and digital signal input/output

• Built-in intelligent logic program, support custom parameter setting

• Strong electromagnetic anti-interference, adapt to harsh industrial and marine environment

• Real-time fault self-diagnosis, alarm prompt and record function

• Support standard communication protocol, convenient upper computer connection and remote monitoring

• Low power consumption, long-term stable continuous operation

• Simple human-machine interface, easy debugging, calibration and daily maintenance

3. Technical Specifications

3.1 Working Conditions

3.2 Hardware Performance

4. Application Scope

• Marine automation system: engine room auxiliary equipment automatic control

• Industrial water treatment and fluid pipeline automatic control

• Power distribution cabinet automatic monitoring and protection control

• Environmental protection equipment automatic operation and status collection

• Pump unit, fan unit automatic start-stop and linkage control

• Intelligent workshop unattended control system

5. Installation Instructions

1. Adopt wall-mounted or cabinet embedded installation; keep the unit horizontal and firm.

2. Reserve enough heat dissipation space around the equipment, do not block ventilation holes.

3. Keep away from high-power electromagnetic equipment, heat source and corrosive gas.

4. Wiring must follow the marking definition; power line and signal line are routed separately to avoid interference.

5. Must connect reliable grounding terminal to ensure anti-interference and safety performance.

6. After wiring is completed, check no short circuit and wrong connection before power-on test.

6. Operation & Debugging

1. Power on the device, enter self-check mode automatically; all indicators light up briefly and then return to normal state.

2. Enter parameter setting interface according to operation manual, set logic threshold, delay time and alarm parameters.

3. Simulate input signal one by one to verify corresponding output action and alarm function.

4. After debugging is normal, switch to automatic operation mode; the system runs automatically according to preset logic.

5. Regularly check indicator status and running record, confirm no abnormal fault code.

7. Safety Precautions

• Professional electrician and technical personnel are required for installation and wiring.

• Cut off power supply completely before opening the shell for maintenance.

• Do not use in flammable, explosive and strong corrosive environment without protection.

• Avoid overvoltage and overcurrent impact on the input and output terminals.

• Static protection must be done when touching internal circuit modules.

8. Maintenance & Daily Care

• Keep the equipment surface clean, dust and oil pollution are not allowed.

• Check wiring terminals regularly to ensure no looseness and oxidation.

• Every 6 months, perform a full function inspection and parameter calibration.

• Long-term shutdown should be stored in dry and ventilated environment, moisture-proof and dust-proof.

• If fault code appears, stop automatic operation first, troubleshoot according to fault prompt before reuse.

9. Troubleshooting

10. Warranty & Disclaimer

• Product Model: DELOMATIC-3 Intelligent Control Unit

• Warranty period: 12 months under normal installation and use

• The warranty does not cover damage caused by unauthorized disassembly, wrong wiring, overvoltage impact and harsh environment.

• All specifications in this manual are subject to change without prior notice. The manufacturer reserves the right to modify product design and performance for technical upgrade.