Product Specification Document: Bently Nevada 330130-045-00-00

1. Product Overview

2. Basic Product Information

Manufacturer and Model Identity

• Manufacturer: Bently Nevada (Emerson Automation Solutions)

• Product Series: 3300 XL Proximity Transducer System

• Model Number: 330130-045-00-00

• Product Type: 8 mm Standard Extension Cable

• Compatibility: 3300 XL 8 mm Probes (e.g., 330108 series); 3300/3500 Series Proximitor Sensors and Monitoring Systems

• Country of Origin: United States

Electrical Characteristics

• Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical

• Conductor Configuration: 3-conductor shielded triad cable

• Voltage Compatibility: Designed for -17.5 V DC to -26 V DC supply from proximitor

• Signal Sensitivity: <2 mV change per volt change in input voltage

• Impedance Matching: Optimized for 8 mm eddy current probe signal transmission

• Shielding: Full stainless-steel braid shield for EMI/RFI immunity

Physical and Mechanical

• Cable Length: 4.5 m (14.8 ft)

• Cable Diameter: 6.4 mm (0.25 in)

• Insulation Material: PTFE (Polytetrafluoroethylene)

• Jacket Material: High-temperature, oil-resistant elastomer

• Connector Type: Precision-molded, keyed connectors (probe end and proximitor end)

• Pull Strength: 330 N (75 lbf) minimum (CableLoc design)

• Net Weight: ~0.5 kg (1.1 lb)

• Bend Radius: Minimum 50 mm (2 in) (continuous); 25 mm (1 in) (occasional)

Compliance and Certification

• Standards: API 670 (4th edition), IEC 61000-6-2, CE marked (EMC, LVD)

• Environmental: RoHS compliant; halogen-free insulation

• Certifications: cULus, ATEX/IECEx (optional with approved fittings)

• Quality: ISO 9001 manufacturing; 100% factory tested

3. Function and Product Positioning

Core Functions

• Signal Transmission: Transmits low-level eddy current signals from the probe to the proximitor with minimal attenuation or distortion, preserving linearity and accuracy.

• System Extension: Allows separation between the probe (mounted on machinery) and the proximitor (installed in control panels) up to 4.5 meters, accommodating diverse installation layouts.

• Environmental Protection: Shields conductors from EMI/RFI interference, oil, moisture, and extreme temperatures, ensuring reliable operation in harsh industrial environments.

• Mechanical Strain Relief: Patented CableLoc design reinforces connector junctions, resisting pull, vibration, and flexing to prevent cable damage or signal loss.

Operational Features

• Interchangeability: Fully compatible with all 3300 XL 8 mm probes and proximitors; no component matching or field calibration required.

• Linear Performance: Maintains system linearity (±0.25% full-scale) over the entire cable length, supporting 0–2.5 mm (0–100 mil) gap measurements.

• Temperature Stability: Exhibits minimal capacitance drift across operating temperatures, ensuring consistent sensitivity and measurement accuracy.

• Self-Diagnostics Support: Enables fault detection for open/short circuits and cable damage when used with 3300/3500 monitoring systems.

Product Positioning

• Machinery health monitoring (vibration, position, speed)

• API 670-compliant turbine and compressor protection systems

• Remote probe installations in high-temperature or hard-to-reach areas

• System expansion and retrofit projects for legacy 3300 XL installations

4. Core Performance Parameters

Environmental Limits

• Operating Temperature: -51°C to +177°C (-60°F to +351°F)

• Storage Temperature: -55°C to +200°C (-67°F to +392°F)

• Relative Humidity: 5%–95% RH (non-condensing)

• Vibration Resistance: 25 g (5 Hz–2 kHz); 50 g shock (11 ms half-sine)

• Chemical Resistance: Resists mineral oils, greases, and common industrial solvents

Electrical Performance

• Frequency Response: DC to 10 kHz (±3 dB), matching 3300 XL system bandwidth

• Linearity Contribution: <±0.1% full-scale error (cable-only)

• Noise Rejection: >60 dB EMI/RFI attenuation (1 MHz–1 GHz)

• Insulation Resistance: >100 MΩ @ 500 V DC (conductor-to-shield)

Reliability

• MTBF: >250,000 hours (25°C, full load)

• Warranty: 1 year (standard); extended warranties available

• Lifecycle Status: Active production (widely supported in new and legacy systems)

5. General Matching Accessories

Installation and Mounting

• Cable clamping and strain relief kit (high-vibration areas)

• Connector protective boots (dust/moisture protection)

• Cable routing guides and clamps (panel/machinery mounting)

• Hazardous-area cable glands (ATEX/IECEx certified)

System Compatibility

• 3300 XL 8 mm Probes (e.g., 330108-91-05)

• 3300/3500 Series Proximitor Sensors

• 3300/3500 Series Vibration Monitoring Modules

• 4–20 mA signal converters (PLC/DCS integration)

Maintenance and Spares

• Replacement connector pins and sockets

• Cable repair kit (PTFE insulation, stainless-steel braid)

• Connector cleaning and inspection kit

• Calibration verification tools (system performance check)

Documentation and Software

• 330130-045-00-00 datasheet and installation manual

• Bently Nevada 3300 XL system planning guide

• Proximity system calibration software (setup and verification)

• Factory test and calibration report (included with unit)

6. Applicable Equipment and Industry Fields

Primary Applications

• Power Generation: Steam/gas turbines, generators, and large compressors in thermal, hydro, and wind power plants.

• Oil and Gas: Centrifugal compressors, pumps, and turbines in refineries, offshore platforms, and pipelines.

• Petrochemical: Reactors, mixers, and process compressors requiring continuous vibration and position monitoring.

Secondary Applications

• Process Industries: Water treatment pumps, pharmaceutical mixers, and food/beverage processing machinery.

• Manufacturing: High-speed machine tools, printing presses, and textile machinery for vibration control.

• Marine: Ship propulsion turbines, generators, and cargo pumps for condition monitoring.

Compatibility Notes

• 8 mm System Exclusive: Designed only for 3300 XL 8 mm probe systems; not compatible with 5 mm or 11 mm probe systems.

• Total Length Matching: Combined probe and extension cable length must match the proximitor’s calibrated total length (e.g., 5 m system = 0.5 m probe + 4.5 m extension).

• Standard Cable Only: This model (00 suffix) is standard cable; armored or FluidLoc options require different part numbers。