Bently Nevada 133300-01 Low Voltage DC Input Rear I/O Module for 3500/15 Power Supply Front Card
133300-01 is original US-manufactured dedicated rear termination I/O card exclusively matched with Bently Nevada 3500/15 low voltage DC power front module, belonging to the core power accessory of global mainstream 3500 series TSI rotating machinery protection system. This rear I/O card is installed at the corresponding single-width rear slot of the leftmost power position on standard 3500/05 instrument rack, serving as the exclusive external DC power wiring transition carrier for 3500/15 front power module, all field input DC power cables are wired onto terminal blocks of this rear card before being transmitted to front power unit via rack internal gold-plated backplane connector. The whole PCB substrate is coated with three-proof conformal coating to resist cabinet oil mist, condensation, industrial dust and trace corrosive gas, adapting long-term stable operation inside control cabinets of thermal power, petrochemical, coal chemical and oil & gas industry critical turbomachinery units. It can not be randomly matched with other monitor front cards including vibration, speed, temperature and communication modules of 3500 series product lineup, mismatched assembly will lead to whole rack power supply failure and system shutdown risk.
Description
Bently Nevada 133300-01 Low Voltage DC Input Rear I/O Module for 3500/15 Power Supply Front Card
1. Product Overview
133300-01 is original US-manufactured dedicated rear termination I/O card exclusively matched with Bently Nevada 3500/15 low voltage DC power front module, belonging to the core power accessory of global mainstream 3500 series TSI rotating machinery protection system. This rear I/O card is installed at the corresponding single-width rear slot of the leftmost power position on standard 3500/05 instrument rack, serving as the exclusive external DC power wiring transition carrier for 3500/15 front power module, all field input DC power cables are wired onto terminal blocks of this rear card before being transmitted to front power unit via rack internal gold-plated backplane connector. The whole PCB substrate is coated with three-proof conformal coating to resist cabinet oil mist, condensation, industrial dust and trace corrosive gas, adapting long-term stable operation inside control cabinets of thermal power, petrochemical, coal chemical and oil & gas industry critical turbomachinery units. It can not be randomly matched with other monitor front cards including vibration, speed, temperature and communication modules of 3500 series product lineup, mismatched assembly will lead to whole rack power supply failure and system shutdown risk.
2. Core Functional Description
2.1 External Low Voltage DC Power Input Termination
The module is equipped with dedicated heavy-duty pluggable power terminal blocks to receive field low voltage DC input source, rated standard input specification covers 20VDC to 30VDC nominal working range and wide tolerance input from 88VDC up to 140VDC for special high DC power distribution site conditions. External direct current power is connected onto rear terminal of 133300-01, filtered and pre-protected by onboard over-current and surge suppression circuit, then transferred to paired 3500/15 front power module through front edge gold-plated backplane connector, after internal power conversion of front card, multi-channel regulated working voltage is distributed via rack backplane to supply all monitor, communication and display modules installed across the entire 3500 rack slots. The terminal layout supports single power feed or dual redundant power wiring configuration to realize hot backup power architecture for critical protection rack.
2.2 Rack Power Fault Dry Contact Signal Output
Independent isolated terminal partitions are reserved for power system comprehensive fault relay dry contact routing derived from 3500/15 front power logic circuit. The passive relay contacts will switch status once abnormal conditions occur including external input power loss, overvoltage/undervoltage input, front power module hardware failure and internal backplane power bus breakdown. These hard-wired fault terminals can be directly wired to DI input loop of plant central DCS system and onsite local annunciator panel, providing independent hard-contact power fault alarm irrelevant to digital Modbus communication data, realizing redundant power failure early warning for unit protection system.
2.3 Built-in Overcurrent, Overvoltage and Surge Protection
Onboard integrated fuse protection circuit, transient voltage suppression component and ESD protection device for each power input loop of the module. In case of field wiring short circuit, wrong polarity wiring, instantaneous lightning induced overvoltage and power grid surge impact, internal protection circuit will rapidly cut off input power path to avoid permanent damage to 3500/15 front power unit and entire rack internal electrical components. All protection action status will be uploaded via rack backplane bus to 3500 configuration software and System 1 upper monitoring platform for real-time fault record and troubleshooting guidance.
2.4 Backplane Bus Power & Status Bidirectional Transmission
Gold-plated edge connector on module front side establishes stable physical connection with 3500 rack backplane, accomplishing two-way signal and power transmission between rear termination card and front 3500/15 power module. It feeds valid external input power into front power unit, meanwhile collects real-time power operating parameters, self-test status and fault codes from front power module and transmits these diagnostic information to full rack bus for centralized system status monitoring.
2.5 Continuous Onboard Self-Diagnostic Monitoring Function
Embedded independent diagnostic circuitry continuously monitors terminal open circuit, short circuit, abnormal input voltage deviation and internal component abnormal heating status of all power loops and fault contact circuits on the card. All detected fault events are stored into onboard non-volatile memory and synchronized to upper system software, enabling maintenance staff to rapidly locate external power cable failure or terminal wiring fault without disassembling front power module from rack slot.
3. Mechanical and Physical Specifications
All field power wiring terminals adopt detachable plug-in screw terminal structure, power input terminals and fault relay contact terminals are partitioned in separated layout to avoid construction wiring confusion during field installation and regular overhaul maintenance. The module follows unified single-width dimensional standard of all 3500 series rear I/O modules, fixed outline dimension conforms to factory original design specification with net weight around 1.0kg per unit. Elastic lock buckles are equipped on both vertical sides of module housing to fix the card tightly inside rack rear slot, effectively eliminating poor contact risk caused by long-term cabinet vibration from adjacent running large rotating equipment. Reinforced PCB mechanical structural design improves shock resistance and long-term operational stability under complicated industrial cabinet environment.
4. Electrical and Environmental Technical Parameters
The module completes all power transmission and signal interaction through rack backplane connector without extra independent auxiliary power supply requirement from external field source. Maximum allowable input current reaches 11A under full-load entire rack power supply condition, matching full power consumption demand of fully populated 3500 rack with all monitor and communication modules installed. Each circuit on the card complies with CE EMC electromagnetic compatibility certification and global API670 turbomachinery protection standard, equipped with full-range anti-interference design against surrounding high-frequency inverter and high-current power cable electromagnetic radiation interference.
For ambient working condition parameters, continuous rated operating temperature range is -30℃ to +65℃ to support all-year-round cabinet running, short-time intermittent peak ambient temperature up to +75℃ will not generate irreversible damage to internal electronic components. Applicable working relative humidity ranges from 5%RH to 95%RH under non-condensing environment to adapt high-humidity, high-dust and oil mist filled conventional industrial control room surroundings. Specified spare part warehouse storage temperature covers -40℃ to +85℃, required to be stored inside dry sealed warehouse away from acid-base corrosive vapor, liquid soaking and violent mechanical collision damage. As general non-intrinsically safe standard design, external safety barrier accessories are mandatory if field wiring routes into Class I explosion hazardous classified area.
5. Matching Rule and Version Description
133300-01 is the exclusive standard rear termination I/O part number specially customized for 3500/15 low voltage DC front power module within Bently Nevada 3500 rear I/O product series, no factory released upgraded revision variant for this base part number. It cannot be cross replaced with rear I/O cards of other part numbers designed for AC power, high voltage DC power or various signal monitor front modules, mismatched front-rear combination directly results in rack power supply interruption and complete TSI system offline. Bare spare module marked as base part number 133300-01 without original factory sealed package; finished original factory packed complete product with full factory outgoing test report and inspection document will attach extra suffix mark on part number tail.
6. Industrial Application Range
Matching with 3500/15 front power module to compose complete rack low voltage DC power supply unit, 133300-01 is widely applied in critical TSI protection projects across global energy and heavy process industries. Core application fields include steam turbine generator set TSI cabinet power configuration of thermal power plants, large centrifugal compressor and hydrogen compressor monitoring system power wiring layout inside petrochemical and coal chemical non-explosion control room, induced draft fan and feed water pump turbomachinery protection cabinet power matching for metallurgy production line, as well as onshore and offshore oil & gas production platform safety zone monitoring rack power distribution setup, functioning as essential power input interface to guarantee uninterrupted power supply of entire 3500 protection system.
7. Factory Inspection and Warranty Terms
Every brand new original 133300-01 undergoes strict pre-delivery factory verification including terminal continuity test, full-range input voltage compatibility calibration, long-time continuous power-on burn-in aging test and high-low temperature cycle reliability screening experiment to ensure all electrical and mechanical indexes fully comply with US original factory design specification. Manufacturer standard commercial warranty period is twelve months counting from formal product delivery date; free repair or replacement service is available for inherent manufacturing defect induced hardware failure under rated environmental and electrical operating scope within valid warranty period. Product damage caused by unauthorized housing disassembly, wrong field terminal wiring, external lightning surge overvoltage impact, artificial mechanical collision and chemical medium corrosion is excluded from all free warranty coverage.
Get a Quote