DM400YJ
Description
Foxboro DM400YJ (FBM08) – 120VAC Input Module
Product Overview
Model: DM400YJ (FBM08)
Type: 8-channel isolated AC digital input module
System: Foxboro I/A Series DCS
Specifications
Input Voltage: 120VAC (nominal), 50/60Hz
Channel Count: 8 isolated input channels
Input Type: Dry contact / 120VAC voltage input
Isolation: 250VACrms (channel-to-channel, channel-to-ground)
Response Time: ≤10ms (per channel)
Backplane Power: 24VDC ±10%
Power Consumption: ≤3.5W
Operating Temp: 0°C to +55°C (32°F to 131°F)
Storage Temp: -40°C to +85°C (-40°F to 185°F)
Humidity: 5%–95% RH, non-condensing
Dimensions (D×W×H): 18" × 5.5" × 1.5"
Weight: ~2.3 kg (5.0 lbs)
Hot Swap: Supported (online replacement)
Diagnostics: Open/short circuit detection, channel status LED
Installation & Wiring
Mounting: Single-slot, vertical installation in I/A Series 100-series chassis; allow ≥50mm top/bottom clearance for cooling.
Cable: Shielded twisted pair (18–22 AWG); max length 300m.
Shielding: Shield grounded at one end only (control room side).
Separation: Keep AC input cables ≥30cm from DC/power cables to reduce interference.
Terminals: Torque terminals to 0.8–1.0 N·m; avoid loose connections.
ESD: Use anti-static wristband during handling; do not touch gold contacts.
Operation & Maintenance
LED Indicators:
PWR: Green = Backplane power OK
RUN: Green blinking = Normal communication
FAULT: Red = Channel fault (open/short) or communication error
Redundancy: Supports dual-module redundant pairing; switchover <50ms.
Maintenance:
Inspect terminals annually; re-torque if needed.
Clean dust from module/chassis every 6–12 months.
End-of-life: Discontinued; replace with spare module (no field repair).
Compatibility
Direct Replacement: FBM08, DM400YJ-0E
System Compatibility: I/A Series 100-series; works with CP10, CP30, CP60 controllers.
Upgrade Alternative: FBM238 (I/A 200-series, Ethernet-based digital input module).
Spare Notes: Only refurbished/used units available; DM400YJ, DM400YL, DM400YP are pin-compatible variants.

Get a Quote