3. Product Specification Manual

3.1 Basic Product Information

• Brand: Foxboro (Schneider Electric EcoStruxure Process Automation)

• Model: P0916VB

• Product Type: LSZH Double Shielded FBM Termination Cable

• Applicable System: I/A Series Distributed Control System

• Standard Fixed Length: 1m (3.28ft)

• Conductor: 0.5mm² fine-stranded tinned oxygen-free copper wire

• Insulation Material: H/XLPE high temperature cross-linked polyethylene

• Outer Sheath: LSZH Low Smoke Zero Halogen flame retardant sheath

• Connector: Dual-end pre-crimped gold-plated 37-pin D-Sub plug

• Origin: United States

• Net Weight: 0.18kg

• Cable Outer Diameter: 8.5mm

• Protection Grade: IP20 (indoor cabinet wiring)

3.2 Core Electrical Performance Parameters

1. Rated Voltage: 300V AC/DC

2. Single Core Continuous Rated Current: 5A

3. Shield Structure: Pair independent shielding + overall copper braided shielding, coverage ≥96%

4. Supported Signal Types: 4–20mA analog loop, HART FSK digital signal, 24VDC DI/DO discrete signals, RTD/TC weak measurement signals

5. EMC Standard: IEC 61000-6-2 industrial anti-interference, suppress common-mode ground loop noise and frequency converter electromagnetic radiation

6. Single Conductor Loop Resistance: ≤0.075Ω/m, ultra-low signal attenuation for high-precision process measurement

7. Contact Service Life of Plug: ≥10,000 times plugging/unplugging without poor contact

3.3 Environmental Operating Specifications

• Long-term Working Temperature: -25℃ ~ +85℃

• Instant Peak Heat Resistance: 110℃ short-time tolerance

• Storage & Transportation Temperature: -40℃ ~ +90℃

• Working Humidity: 5%–95% RH, non-condensing

• Environmental Grade: ISA S71.04 Class G3, resistant to oil mist, light corrosive dust and mechanical vibration

• Certifications: CE, RoHS, UL LSZH fire safety certification

3.4 Core Functional Features

1. LSZH Low Smoke Zero Halogen Design: No toxic halogen gas release during fire, low smoke density, compliant with power plant, chemical plant fire safety cabinet wiring standards

2. Factory Pre-terminated Dual Gold-plated Connectors: Eliminate on-site wiring errors, greatly shorten DCS cabinet assembly and maintenance cycle

3. Double-layer Full Shielding Structure: Effectively isolate interference from high-power motors, inverters and high-voltage power cables, avoid analog signal drift and HART communication interruption

4. Full Series Universal Compatibility: Matches P0916UJ backplane, P0916UY signal terminal base, all FBM200 analog/digital I/O modules; interchangeable with P0916VA 0.5m short cable

5. Anti-fatigue Flexible Cable Body: Multi-strand soft copper core, withstand repeated bending during module replacement and cabinet wiring without internal wire breakage

6. High Temperature & Anti-corrosion Performance: H/XLPE insulation resists cabinet internal heat accumulation, LSZH sheath is resistant to weak acid and oil mist erosion in chemical workshops

3.5 Installation & Operation Precautions

1. P0916VB cable shall only be laid inside fully sealed industrial control cabinets; outdoor exposure, direct heat source baking and liquid soaking are prohibited

2. Separate signal cables and high-voltage power cables by at least 15cm during wiring; vertical 90° crossing must be adopted for unavoidable cross layout to reduce interference coupling

3. Cable shielding layer must implement single-point grounding on cabinet ground copper bar; double-end grounding will generate ground loop and cause signal measurement deviation

4. Minimum bending radius of the cable shall not be less than 6 times the outer diameter; avoid sharp bending, pulling and twisting during plugging and wiring

5. Do not arbitrarily cut, peel or damage cable insulation and shielding layer; unauthorized disassembly will void factory stability warranty

6. Check connector tightness every 3–6 months in high-vibration metallurgy and mining workshops; re-plug connectors if loose contact occurs

7. Classify and bind signal cables and power cables separately with soft cable ties; excessive compression that damages internal shielding is forbidden

4. Application Fields

1. Thermal Power & Waste Incineration Power Plant: Boiler, turbine auxiliary control cabinet internal FBM module and signal terminal interconnection, LSZH cable mandatory fire safety wiring

2. Oil & Petrochemical Industry: Refinery, chemical synthesis workshop control cabinet analog signal and HART instrument wiring, anti-corrosion and flame retardant demand scenarios

3. Fine Chemical & Pharmaceutical Manufacturing: Aseptic pharmaceutical workshop, pesticide production line DCS cabinet internal I/O signal transmission

4. Water Treatment & Desalination: Large urban sewage plants, industrial circulating water control cabinet medium-distance wiring layout

5. Metallurgy & Mineral Processing: Smelting furnace, rolling mill high-vibration control cabinet internal module signal connection

6. Pulp & Paper Industry: Multi-unit papermaking production line DCS cabinet distributed signal wiring

7. Underground Tunnel & Substation Automation: Low-smoke zero-halogen safety wiring for closed underground control rooms

Information Verification Note

1. Confirmed content: Product positioning as 1m LSZH double shielded FBM termination cable, dual-end 37-pin D-Sub gold-plated connectors, 300V rated voltage, IP20 cabinet internal use, G3 environmental grade, full compatibility with P0916 series rack modules and FBM200 I/O, LSZH fire protection core feature (source: Foxboro I/A Series official cable specification PSS 41H and automation supplier public product data of P0916VB)

2. Content to be further verified: Maximum single cable supportable HART channel quantity, complete cable bending fatigue test data, factory customized length modification calibration procedures (only general cable technical parameters provided in original official manual, exclusive full test report of single P0916VB model not retrieved)