Description

已完成思考,参考 22 篇资料

MÜLLER EZD / 10396: Three-Phase DIN Rail Energy Meter Product Description

Brand and Product Identification

The MÜLLER EZD / 10396 is a digital three-phase energy meter manufactured by Müller + Ziegler GmbH, belonging to the EZD series of DIN rail-mounted electricity metering devices. The EZD prefix identifies the three-phase energy meter product line, and the 10396 number is the internal material and order reference code corresponding to a specific metering configuration within the EZD family. The EZD series includes both direct-connection and CT-connected variants, with options for pulse output, analog output and Ethernet communication, engineered for active and reactive energy measurement in low-voltage three-phase AC power distribution systems.

Product Function and System Role

The EZD energy meter measures and accumulates active and reactive energy for both import and export in three-phase networks with arbitrary load characteristics. It samples real-time electrical parameters via internal current transformers (direct version) or external current transformers (CT version), processes values through an integrated metering IC and microcontroller, and displays readings on the front-panel LCD. Accumulated energy data and configuration settings are stored in non-volatile memory, preserving all records during power failures. Output interfaces transmit energy pulses or real-time power signals to external systems for energy management, cost allocation and monitoring. It is a dedicated electrical energy metering device, not a power quality analyzer, protection relay, PLC or circuit breaker.

Electrical and Measurement Specifications

  • System type: Three-phase three-wire or four-wire AC network

  • Rated voltage: 3 × 230 V / 400 V (L-N / L-L)

  • Frequency range: 45 – 65 Hz

  • Current rating: Direct connection version up to 80 A; CT-connected version for 1 A or 5 A secondary current transformers

  • Measurement parameters: Phase and line voltage, phase current, active/reactive/apparent power, power factor, frequency, import/export active energy, import/export reactive energy, phase sequence

  • Accuracy class: Active energy Class 1, reactive energy Class 2 according to MID and IEC 62053 standards

  • Starting current: 0.4 % of rated current for direct version

  • Power supply: Self-powered from the measured voltage circuit; no auxiliary supply required

Output and Communication Features

The EZD series offers multiple output configurations depending on variant. The S0 variant provides a galvanically isolated S0 pulse output for active energy, with a pulse constant matched to the current rating (e.g. 600 imp/kWh for 80 A direct version, 10000 imp/kWh for CT version), plus a configurable 0/4 – 20 mA analog output proportional to instantaneous active or reactive power. The TCP variant adds an Ethernet interface with Modbus TCP protocol and built-in web server, allowing remote reading of all measured values and configuration via a standard web browser. All variants support non-volatile data storage and fault-free operation across typical mains voltage fluctuations.

Display and User Interface

The front panel features a backlit LCD display with multi-page navigation, controlled by two pushbuttons. Displayed values include per-phase and total current, phase-to-neutral and phase-to-phase voltage, frequency, total and per-phase active/reactive power, power factor, import and export energy totals, phase sequence indication and device status. The user can scroll through measurement pages and configure basic parameters such as pulse constant, CT ratio and output scaling directly via the front buttons, with password protection available to prevent unauthorized modification.

Mechanical Construction and Mounting

The meter uses a compact modular housing designed for snap-on mounting onto a standard 35 mm DIN rail according to EN 60715. Housing width corresponds to multiple standard module widths, fitting into typical distribution boards and control cabinets. Terminals are located on the top and bottom for line and load wiring, with screw-type connections suitable for copper conductors up to the specified cross-section. Degree of protection is IP20 on the front and terminal sides, intended for installation inside enclosed switchboards and control panels. Operating ambient temperature ranges from -25 °C to +55 °C, with storage temperature from -40 °C to +70 °C.

Standards and Compliance

The EZD series complies with IEC 62053-21 / -23 for static electricity meters, EN 50470-1 / -3 and relevant MID requirements for active and reactive energy measurement. It meets EN 61326 EMC emission and immunity standards for industrial environments, carries CE marking, and is suitable for sub-metering, cost allocation and internal energy monitoring applications in commercial and industrial facilities.

Typical Application Scenarios

Typical applications include sub-metering in industrial plants, workshop and machine-level energy monitoring, office building and commercial facility cost allocation, distribution board branch circuit metering, renewable energy system feed-in and consumption measurement, and energy management systems compliant with ISO 50001. The direct-connection version suits low-current feeders and machine circuits, while the CT-connected version is used for higher-current mains feeders and main distribution boards. The Ethernet variant is preferred for networked energy monitoring and building automation integration.

Installation and Commissioning Notes

Installation shall follow the Müller + Ziegler EZD operating manual, local electrical codes and metering installation practices. Snap the meter onto the 35 mm DIN rail in the distribution board, connect voltage and current circuits according to the terminal diagram, and observe correct phase sequence and CT polarity for accurate energy direction detection. For CT versions, verify the CT ratio and configure it in the meter to ensure correct energy scaling. Configure the pulse output constant, analog output range and communication parameters as required by the energy management system. After power-up, verify voltage, current, power readings, phase sequence and energy accumulation direction before putting the meter into service.

Advantages and Selection Notes

The EZD series offers compact DIN rail mounting, bidirectional import/export energy measurement, multi-parameter real-time display, non-volatile data storage, flexible output options (S0 pulse, analog, Ethernet), Class 1 active energy accuracy and broad compatibility with standard distribution boards. When selecting a replacement, confirm direct versus CT connection, rated current, CT ratio, output type (S0, analog, TCP), pulse constant and the internal 10396 reference code to match the existing installation. The EZD is a three-phase energy meter, not a power quality analyzer, protection relay or network analyzer; its role is to measure and record electrical energy consumption and feed-in for monitoring and cost allocation purposes.


Get a Quote