Description
EUCHNER TP2-538A024M CW0142: TP Guard Locking Safety Switch Product Description
Brand and Product Identification
The EUCHNER TP2-538A024M, with traceability reference CW0142, is an electromechanical safety switch with guard locking from the Euchner TP series, designed for machine guard door and flap monitoring. The official Euchner order number for this base model is 084333, with a gross weight of 0.439 kg and GTIN 4047048000537. The TP2 prefix denotes the open-circuit current (power-to-lock) locking version, 538 identifies the slow-action switching element and contact configuration, A024 specifies the 24 V solenoid rating, and M indicates the M20 cable entry variant. The CW0142 reference is an internal unit, production or batch identification code associated with this switch assembly. The matching actuator is sold separately.
Product Function and System Role
The TP2-538A024M detects guard position and mechanically locks the machine guard during hazardous operation. Its two positively driven contacts provide reliable guard lock status feedback to the safety control circuit, ensuring that hazardous motion is only enabled when the guard is confirmed locked. The unit is equipped with a front auxiliary release for emergency access and uses rear cable entries for field wiring. It is a guard locking safety switch, and not a standard door limit switch, safety relay, contactor, PLC, actuator or standalone sensor.
Guard Locking Principle
The TP2 series operates on the open-circuit current principle, also described as power-on-to-lock electrical guard locking. The guard remains locked as long as the guard locking solenoid is energized; unlocking is performed by spring force when solenoid power is interrupted. This fail-safe spring-release behavior ensures the guard can be opened when control power is lost, supporting maintenance access and egress requirements.
Electrical Specifications
The solenoid is rated for 24 V AC/DC with a tolerance of -15% to +10%, and power consumption is 8 W at 100% duty cycle. Conventional free-air thermal current Ith is 4 A, rated insulation voltage Ui is 250 V, and rated impulse withstand voltage Uimp is 2.5 kV. Contact utilization categories include AC-15 at 4 A / 230 V and DC-13 at 4 A / 24 V. Minimum switching current is 1 mA at 24 V and 10 mA at 12 V. Overcurrent protection shall use a maximum 4 A gG fuse. Conductor cross-section for wiring ranges from 0.34 mm² to 1.5 mm².
Contacts and Mechanical Ratings
The 538 switching element provides two positively driven NC contacts dedicated to guard lock monitoring, with no door position contacts included on this variant. Contact material is silver alloy with gold flashing, and the housing is glass-fiber reinforced thermoplastic. Maximum locking force Fmax is 1300 N, rated locking force FZh is 1000 N, extraction force is 20 N, actuating force is 10 N and retention force is 10 N. Maximum approach speed is 20 m/min, maximum actuation frequency is 1200 cycles per hour, and mechanical service life is 1 × 10⁶ operations. Degree of protection is IP67, and the switch can be mounted in any orientation.
Actuator Compatibility and Mounting
Approach direction is adjustable in 90° steps for both horizontal and vertical insertion, with increased overtravel available for the horizontal direction. When paired with ACTUATOR-P-GT, horizontal overtravel is 2 mm and vertical overtravel is 1.5 mm; when paired with ACTUATOR-P-GNT, horizontal overtravel is 7 mm. Mounting plates and brackets such as EMP-B1, EMP-B2 and EMP-SB are available as accessories. The actuator must be ordered separately and precisely aligned to the switch according to the dimensional drawing.
Safety Characteristics
The B10D value for guard lock monitoring is 3 × 10⁶ operations, with a mission time of 20 years, valid under DC-13 100 mA / 24 V conditions. Overall safety performance level (PL), category and SIL rating depend on the complete safety circuit architecture, including external safety relays or safety controllers, wiring redundancy and actuator selection. The switch shall be evaluated as part of the machine guard safety system in accordance with EN ISO 13849-1 and EN IEC 62061.
Auxiliary Release
A front-mounted auxiliary release allows manual unlocking of the guard in the event of a malfunction or power failure, using a tool or key. To prevent unauthorized misuse, the auxiliary release must be protected, for example by sealing lacquer or a security seal, in accordance with the operating instructions and applicable safety requirements.
Typical Application Scenarios
Typical applications include safety guards on packaging machines, machine tools, presses, robotic cells, assembly lines, injection molding machines, conveyor systems and welding cells. The M20 cable entry version is preferred in installations where cable glands and hardwiring are specified over plug-in connectors, and the positively driven lock monitoring contacts are suitable for connection to safety relays or safety PLC input circuits.
Installation and Commissioning Notes
Installation must be performed in accordance with the Euchner TP series operating instructions, machinery safety standards and local electrical regulations. Mount the switch and matched actuator on the guard and frame, verify approach direction, insertion depth, overtravel and alignment, wire the 24 V solenoid supply, two lock monitoring contacts and auxiliary release circuit, and fit cable glands to the three M20 × 1.5 entries. After commissioning, test locking, unlocking, contact status, auxiliary release function and the safety response of the complete machine circuit. Confirm that hazardous motion is inhibited when guard locking is released.
Advantages and Selection Notes
The TP2-538A024M offers power-on-to-lock electrical guard locking, two positively driven lock monitoring contacts, 1300 N maximum locking force, IP67 protection, three M20 cable entries, front auxiliary release, reinforced thermoplastic housing and proven TP series mechanical reliability. When selecting a replacement, confirm TP2 (power-to-lock) versus TP3 (spring-to-lock) locking principle, 538 contact configuration, cable entry vs. connector version, solenoid voltage, actuator compatibility and the internal CW reference number. The device is a guard locking safety switch, not a limit switch, safety relay, contactor or drive; its role is to monitor and secure machine guards in industrial safety circuits.
Get a Quote