Description
OMRON C200H-ID212: SYSMAC C200H 16-Channel DC Digital Input Module Product Description
Brand and Product Identification
The OMRON C200H-ID212 is a 16-channel DC digital input module for the Omron SYSMAC C200H and C200Hα series modular programmable controller platforms. The C200H prefix identifies the mid-range SYSMAC C200H PLC I/O family, ID denotes a DC input unit, and 212 specifies the 16-point, 24 V DC, removable terminal block variant. This module is a legacy discontinued product, primarily encountered in existing production lines and used for spare part replacement and retrofit maintenance of older C200H control systems. It occupies one I/O channel slot in the C200H backplane rack and maps 16 input points into the PLC process image area.
Product Function and System Role
The C200H-ID212 acquires on/off DC signals from field devices, conditions and optically isolates the signals, and transmits input status to the C200H CPU through the backplane bus. It reads signals from pushbuttons, limit switches, proximity sensors, relay auxiliary contacts and other 24 V DC field devices, making the contact state available to the PLC ladder program for logic control and interlock processing. It is a digital input module, not a digital output module, analog I/O module, PLC CPU, communication unit, field sensor or contactor.
Input Electrical Specifications
The module provides 16 digital input channels with a single common terminal (16 points per common, 1 circuit). Rated input voltage is 24 V DC with a permissible range of +10% / -15%. Typical input current is 7 mA at 24 V DC. ON-level threshold is a minimum of 14.4 V DC, and OFF-level threshold is a maximum of 5.0 V DC. Input response time is maximum 1.5 ms for both ON and OFF transitions. The unit supports both sinking (NPN) and sourcing (PNP) input wiring, allowing flexible connection to different field device output types.
Isolation and Status Indicators
Input channels are galvanically isolated from the backplane logic circuit by optical coupling, with a withstand voltage of 500 V AC between the field side and system side. Each channel is equipped with an individual green status LED that illuminates when the input is in the ON state, enabling 直观 on-site commissioning and fault troubleshooting. Internal current draw from the 5 V DC backplane bus complies with C200H system power budget limits, and total system power consumption should be verified during rack configuration.
Mechanical Construction and System Compatibility
The module uses a removable terminal block for field wiring, supporting replacement without disconnecting field conductors. It occupies one I/O slot (1 channel) in the C200H CPU rack or expansion rack and is compatible with C200H, C200HS and C200Hα series PLC host units. The C200H-ID212 was officially discontinued by Omron, and it is now mainly used for maintenance and spare part purposes on installed legacy systems. When planning system upgrades, corresponding CS or CJ series input modules can be considered as alternative solutions.
Typical Application Scenarios
Typical applications include digital signal acquisition on legacy production lines, machine tool control systems, packaging machinery, material handling conveyors, assembly equipment and process interlock circuits using C200H-series PLCs. It is suitable for interfacing various 24 V DC field devices such as inductive proximity switches, photoelectric sensors, mechanical limit switches, control pushbuttons, selector switches and auxiliary relay contacts.
Installation and Configuration Notes
Installation shall follow the Omron C200H installation manual, I/O wiring specifications and local electrical codes. Insert the module firmly into the designated backplane slot, connect field wiring to the removable terminal block, verify input type (sinking or sourcing) and common terminal polarity, and confirm I/O address allocation in the PLC program. When replacing a spare module, verify that the model number, hardware revision and terminal configuration match the original unit to ensure compatibility with the existing system. Because the product is discontinued, inventory of spare units should be planned in advance for long-term operation of installed equipment.
Advantages and Selection Notes
The C200H-ID212 offers 16-channel high-density DC input, 1.5 ms fast response, universal sinking/sourcing wiring, optical isolation for noise immunity, removable terminal block for easy maintenance and full compatibility with the C200H controller family. When selecting a replacement, confirm the number of input points, rated voltage, response time, terminal type and rack compatibility. The C200H-ID212 is a digital input module, not an output module, analog unit, CPU or communication module; its role is to interface field on/off DC signals into the SYSMAC C200H programmable controller system.
Get a Quote