SIEMENS 6ES7223-1BH30-0XB0: SIMATIC S7-1200 SM 1223 Digital I/O Module Product Description
Description
已思考
SIEMENS 6ES7223-1BH30-0XB0: SIMATIC S7-1200 SM 1223 Digital I/O Module Product Description
Brand and Product Identification
The SIEMENS 6ES7223-1BH30-0XB0 is a SIMATIC S7-1200 SM 1223 digital input and output signal module. The 6ES7223 order prefix identifies the S7-1200 SM 1223 digital I/O module family, 1BH30 identifies the 8-channel DC input and 8-channel transistor output variant, and 0XB0 identifies the standard S7-1200 module packaging. The product data sheet identifies the module as SM 1223, 8 DI 24 V DC sink or source, 8 DO transistor at 0.5 A. The module mounts on an S7-1200 CPU or expansion module and provides digital field signal acquisition and transistor output switching.
Product Function and System Role
The SM 1223 reads eight 24 V DC digital input signals from field devices such as pushbuttons, limit switches, proximity sensors and relay contacts, and switches eight 24 V DC transistor outputs for solenoid valves, indicator lamps, pilot relays, contactor coils or small DC loads. The module communicates with the S7-1200 CPU through the S7-1200 backplane bus and maps input and output states into the PLC process image. It is a digital I/O signal module, not a CPU, analog module, communication module, relay output module, power supply, field sensor or contactor.
Supply and Current Consumption
Rated module supply voltage is DC 24 V, with permissible range 20.4 V DC lower limit to 28.8 V DC upper limit. The module provides voltage supply to transducers. Current consumption from the backplane bus DC 5 V is maximum 145 mA. Power loss is typically 2.5 W. The module requires front connectors for field wiring. Short-circuit protection is provided externally rather than internally for the module output arrangement.
Digital Input Specifications
The module has eight digital inputs. Input characteristic curve follows IEC 1131 Type 1. Rated input voltage is DC 24 V. Signal 0 input voltage is 5 V DC at 1 mA, and signal 1 input voltage is 15 V DC at 2.5 mA. Input current for signal 0 maximum permissible quiescent current is 1 mA, signal 1 minimum is 2.5 mA and signal 1 typical is 4 mA per channel. Standard input delay is programmable in groups of four with selectable 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 or 12.8 ms. Interrupt inputs are also programmable. Shielded cable length is maximum 500 m, and unshielded cable length is maximum 300 m.
Digital Output Specifications
The module has eight digital transistor outputs. Output voltage rated value is DC 24 V. Signal 0 output voltage is maximum 0.1 V DC with a 10 k ohm load, and signal 1 minimum output voltage is 20 V DC. Permissible signal 1 output current is maximum 0.5 A per channel. Signal 0 residual current is maximum 10 µA. Switching capacity is maximum 0.5 A with resistive load and maximum 5 W on lamp load. Output delay with resistive load is maximum 50 µs from 0 to 1 and maximum 200 µs from 1 to 0. Aggregate output current per group is maximum 4 A at up to 50 degrees Celsius horizontal installation. Shielded output cable length is maximum 500 m, and unshielded output cable length is maximum 150 m.
Diagnostics and Status Indicators
The SM 1223 supports alarms, diagnostic alarms and diagnostic functions. Diagnostics include monitoring the voltage supply to the electronics. Green status LEDs indicate digital output status and digital input status. Diagnostic indication LEDs support field troubleshooting during commissioning and maintenance. The module reports status and fault information through the S7-1200 CPU and TIA Portal diagnostic system.
Isolation and Mechanical Ratings
Digital inputs are galvanically isolated between channels in groups of two. Digital outputs are isolated between channels in groups of one and between channels and the backplane bus at 500 V AC. Degree of protection is IP20. Module housing material is plastic. Dimensions are 45 mm width, 100 mm height and 75 mm depth, with approximate weight 210 g. The module mounts in the S7-1200 controller rack beside the CPU or previous expansion module.
Standards and Approvals
The module carries CE marking and C-TICK approval, with FM approval listed in the product data sheet. It is designed for SIMATIC S7-1200 industrial control installations in control cabinets and enclosures. Environmental ratings, installation clearance and derating should follow the S7-1200 system manual for horizontal or vertical mounting and ambient temperature.
Typical Application Scenarios
Typical applications include small machine control, conveyors, packaging machines, assembly stations, material handling, pumps, fans, production lines, indicator and lamp control, valve control, pilot relay switching and remote or local digital I/O expansion on S7-1200 PLC systems. The DC transistor outputs suit switching 24 V DC solenoids, relays and lamps rather than AC motor loads or high-power contactor coils.
Installation and Configuration Notes
Installation should follow the SIMATIC S7-1200 system manual, module wiring diagrams and TIA Portal hardware configuration guidance. Mount the module on the S7-1200 rack, connect the front connectors, wire 24 V DC input and output circuits according to sink or source configuration, verify output group current and external short-circuit protection, and configure input delays, interrupts and diagnostics in the TIA Portal project. Check input and output LEDs against field devices after commissioning. Confirm total backplane current consumption and 24 V DC power budget for the CPU and expansion modules.
Advantages and Selection Notes
The 6ES7223-1BH30-0XB0 offers eight 24 V DC sink or source inputs, eight 0.5 A transistor outputs, programmable input delays, interrupt inputs, LED status indication, supply voltage diagnostics, channel grouping isolation, compact 45 mm width and S7-1200 system compatibility. When selecting a replacement, confirm SM 1223 variant, DC input versus AC input, transistor versus relay output, output current and group rating, front connector type, module count and CPU power budget. The SM 1223 is a digital I/O module, not a CPU, analog module, communication module, relay output block, power supply or sensor; its role is to acquire digital field signals and switch 24 V DC outputs in a SIMATIC S7-1200 automation system.
Get a Quote