SIEMENS SAS61.03: ACVATIX SAS61 Electronic Valve Actuator Product Description
Description
SIEMENS SAS61.03: ACVATIX SAS61 Electronic Valve Actuator Product Description
Brand and Product Identification
The SIEMENS SAS61.03 is an electromotive valve actuator from the Siemens ACVATIX SAS series for building automation and HVAC control. The SAS61.03 model code identifies a modulating actuator with AC/DC 24 V supply, a positioning signal of DC 0 to 10 V, DC 4 to 20 mA or 0 to 1000 ohms, a positioning time of 30 seconds, a nominal stroke of 5.5 mm and a positioning force of 400 N. The product number associated with SAS61.03 is S55158-A100. The actuator is designed for direct mounting on Siemens two-port and three-port valves with 5.5 mm stroke, used as control and shutoff valves in heating and ventilation plants.
Product Function and Control Type
The SAS61.03 is a modulating control actuator rather than a three-position or on/off actuator. Its positioning signal range corresponds linearly to the valve positioning range, from closed to open or from 0 to 100 percent stroke. A DIL switch allows changeover of the control signal and valve characteristic. The factory setting for the SAS actuator is an equal-percentage logarithmic characteristic with DC 0 to 10 V positioning signal. The actuator provides position feedback U as a DC 0 to 10 V signal for the building controller or monitoring system.
Electrical Supply and Signal Inputs
The operating voltage for the SAS61.03 is AC 24 V plus or minus 20 percent, or DC 24 V plus 20 percent minus 15 percent; in the US it may use an AC 24 V Class 2 supply. The permitted supply frequency is 45 to 65 Hz. The positioning signal Y supports DC 0 to 10 V, DC 4 to 20 mA and 0 to 1000 ohms resistance. For the DC 0 to 10 V input, current draw is 0.1 mA or less and input impedance is 100 kΩ or higher. For the DC 4 to 20 mA input, current draw is DC 4 to 20 mA within plus or minus 1 percent and input impedance is 500 Ω or less. Up to 10 modulating actuators can be driven in parallel on a controller output rated at 1 mA.
Power Consumption and Mechanical Ratings
The SAS61.03 has a nominal stroke of 5.5 mm and a positioning force of 400 N. Positioning time for the nominal stroke is 30 seconds. Power consumption at 50 Hz is 2.3 W operating and 1.8 W standby, with 5.7 VA operating and 4.6 VA standby. The permissible medium temperature with the connected valve is 1 to 130 degrees Celsius. The actuator includes a manual adjuster, and the position can be fixed manually during setup or servicing. LED status indication provides local status feedback, and space is available for an optional auxiliary switch, type ASC10.51.
Functions and Protection Features
The SAS61 series actuators perform calibration during initial commissioning: the actuator drives to the top or bottom end position and the measured values are saved. Valve seat detection is power-dependent; after calibration the exact valve stroke is stored in actuator memory. Foreign body detection responds to clogging by making three attempts to pass the obstruction. If unsuccessful, the actuator continues to follow the positioning signal only within a limited range and the LED flashes red. Forced control in Z mode overrides automatic control from a higher-level controller, with Z connected to G for maximum 100 percent stroke and Z connected to G0 for minimum 0 percent stroke.
Mechanical Construction and Environmental Ratings
The SAS61.03 housing is designed for indoor and outdoor mounting where environmental conditions allow. Degree of protection is IP54. Ambient operating temperature ranges from minus 5 to 55 degrees Celsius, with non-condensing humidity from 5 to 95 percent relative humidity. Transport temperature ranges from minus 25 to 70 degrees Celsius below 95 percent relative humidity, and storage temperature ranges from minus 15 to 55 degrees Celsius at 5 to 95 percent relative humidity. The actuator dimensions for the SAS61 with manual adjustment are approximately 137.6 to 151 mm height, 80 to 106.5 mm width and 21.9 to 84.6 mm depth according to mounting arrangement, with M16 or M20 connection cable entries as applicable.
Compatible Valves and Accessories
The SAS61.03 is used directly with Siemens two-port and three-port valves including VVG44, VXG44, VVG55 and VVG549 series valves with 5.5 mm stroke. Together with the ASK30 mounting kit, it can operate former Landis and Gyr valves with 4 mm or 5.5 mm stroke, such as X3i, VVG45, VXG45, VXG46 and VVI51 types. The optional ASC10.51 auxiliary switch is potential-free with a switching capacity of AC 24 to 230 V at 6 A resistive or 2 A inductive. A weather shield accessory is available for exposed mounting conditions.
Typical Application Scenarios
Typical SAS61.03 applications include control valves in heating systems, ventilation and air conditioning plants, terminal unit valves, radiator or heating coil control, chilled water control, and mixing or bypass valve positioning in commercial and residential building automation. The actuator is suited to proportional control loops where a controller modulates valve position according to temperature, pressure, flow or air quality setpoints. It is commonly installed on small to medium HVAC valves where 400 N force and 5.5 mm stroke match the valve requirements.
Installation and Commissioning Notes
Installation should follow the Siemens SAS actuator basic documentation and local HVAC and electrical codes. The actuator mounts directly on the selected valve without special adjustment, and the manual adjuster can be used to set or hold position during wiring or maintenance. Supply voltage, positioning signal type, valve characteristic and feedback wiring must match the controller output and valve selection. Calibration must be performed at initial commissioning so the actuator stores the actual valve stroke. Cable routing, protection rating, medium temperature and auxiliary switch wiring should be verified before putting the valve into service. External supply fusing should use a slow 6 A to 10 A fuse or a fuse switch up to 13 A with B, C or D release characteristic, and the power source should limit current to a maximum of 10 A.
Advantages and Selection Notes
The SAS61.03 offers a compact 400 N actuator, 30-second positioning time, multiple signal types, equal-percentage or linear characteristic selection, position feedback, manual override, end-position calibration, seat and foreign body detection, and compatibility with common Siemens HVAC valves. When selecting an actuator, distinguish SAS61.03 non-spring return from spring-return SAS61.33 or fail-safe variants, and confirm stroke, force, supply voltage, signal type, valve series and ambient conditions. The SAS61.03 is a modulating valve actuator, not a motor starter, solenoid valve, thermostat or building controller; its role is to position an HVAC valve according to an analog control signal.
Get a Quote