Description

FRITZ KUBLER AH57 0905802687: Electromechanical Hour Meter Product Description

Brand and Product Identification

The FRITZ KUBLER AH57, with identification number 0905802687, is an electromechanical hour meter from the Kubler H57 and AH57 timer and counter series. The AH prefix identifies a base-mount timer designed for 35 mm DIN rail mounting, while H57 or AH57 identifies the 48 by 48 mm DIN hour meter family. The 0905802687 number is the unit, order or internal manufacturing reference associated with this meter. The AH57 is a non-resettable electromechanical elapsed time counter used to measure operating hours on equipment.

Product Function and System Role

The AH57 counts and displays accumulated operating time while supply voltage is applied to the meter. It adds elapsed hours in count mode and provides a mechanical digit display for maintenance scheduling, runtime tracking, warranty management and equipment service intervals. The meter connects in parallel or across the equipment supply voltage so it runs whenever the monitored machine, appliance or system is energized. It is an elapsed time hour meter, not a programmable timer, preset counter, rotary encoder, energy meter, PLC or control relay.

Display and Count Specifications

The AH57 offers seven or eight digit hour display depending on supply type. AC versions provide seven digits with a maximum reading of 99999.99 hours, and DC versions provide eight digits with a maximum reading of 999999.99 hours. Figure height is 4 mm, or 0.16 inch. Figures are white and red on a black background for readability. The meter operates in adding count mode with no reset function, making the accumulated reading tamper-proof and suitable for permanent runtime records. On time duty is 100 percent.

Voltage and Electrical Connection

The AH57 rated voltage options include AC at 20 to 30 V, 42 to 48 V, 100 to 130 V, 187 to 264 V or 360 to 440 V at 50 or 60 Hz, and DC at 10 to 30 V, 36 to 80 V or 100 to 130 V. Existing replacement units have been marked for 24 V AC at 60 Hz, but the exact voltage for the 0905802687 unit must be verified from the meter label because AH57 order codes differ by voltage and frequency. Electrical connection uses screw terminals with maximum tightening torque of 0.8 Nm, rear wire entry for wire up to 2.5 mm², equivalent to AWG 13. Power consumption for DC 100 to 130 V versions is approximately 750 mW according to the datasheet.

Mechanical Construction and Mounting

The AH57 is a DIN rail base-mount timer that clips onto a 35 mm DIN rail according to DIN EN 50022. Front bezel size is 48 by 48 mm, equivalent to 1.89 by 1.89 inches. The housing dimensions in the datasheet are approximately 48 mm wide, 61 mm high and 42.9 to 43.2 mm depth depending on the mounting detail. The meter can be mounted in any position. Protection rating is IP52 on the front side according to DIN 40050, with IP65 available as an option on selected order types. The AH57 series features high shock and impact resistance and a reduced mounting depth.

Standards and Reliability

The Kubler AH57 and H57 series is UL approved according to the product documentation. Electromechanical digit movement provides direct mechanical runtime indication without requiring a separate display supply or battery to retain the accumulated reading. The non-resettable design protects runtime records against accidental reset, and the robust housing supports use in industrial, vehicle and appliance environments.

Typical Application Scenarios

Typical applications include general time measurement, maintenance intervals for measuring instruments such as respiration units, oxygen equipment or dialysis equipment, small appliances, UV lamps, vehicle display panels, generators, pumps, compressors, fans, motors, compressors, industrial machines and marine or mobile equipment where accumulated running hours must be recorded. The meter is commonly used where equipment runtime determines oil changes, filter replacement, bearing service, overhaul intervals or warranty tracking.

Installation and Wiring Notes

Installation should follow the Kubler H57 and AH57 datasheet, local electrical codes and the equipment manufacturer's mounting guidance. Clip the AH57 onto the 35 mm DIN rail, connect the supply terminals to the monitored equipment voltage, and verify voltage, frequency and polarity for DC versions before energizing. Use the specified wire size and screw terminal torque, route wiring away from high-noise motor conductors, and confirm the display advances under powered conditions. Because the meter is non-resettable, inspect the existing reading and voltage rating before installation; replacement should match the original voltage and frequency rating.

Advantages and Selection Notes

The AH57 offers compact DIN rail mounting, 48 by 48 mm front bezel, non-resettable electromechanical hours display, high shock and impact resistance, any mounting position, multiple AC and DC voltage options, screw terminal wiring and tamper-proof accumulated time recording. When selecting a replacement, confirm AH57 versus panel-mount H57 version, exact AC or DC voltage, frequency, digit count, IP rating, terminal arrangement and equipment supply voltage. The AH57 is an electromechanical hour meter, not a preset timer, counter with reset, encoder, energy meter, PLC, relay or sensor; its role is to record and display accumulated equipment operating hours.


Get a Quote