Description

ORING IES-1042FX-MM-SC 01608AA07201: Industrial Unmanaged Ethernet Switch Product Description

Brand and Product Identification

The ORING IES-1042FX-MM-SC, with identification code 01608AA07201, is a six-port unmanaged industrial Ethernet switch from the ORing IES-1000 slim series. The IES-1042 model identifies the six-port FX fiber switch, FX identifies 100Base-FX fiber ports, MM identifies multimode fiber, and SC identifies the SC fiber connector type. The 01608AA07201 number is the unit or manufacturing identification reference associated with this switch. The device provides four copper Ethernet ports and two multimode fiber ports for rugged industrial network deployment.

Product Function and System Role

The IES-1042FX-MM-SC operates as an unmanaged Layer 2 Ethernet switch, automatically forwarding packets between copper and fiber interfaces using store-and-forward switching. It requires no software configuration and provides plug-and-play network expansion for industrial automation equipment. The switch links PLCs, HMIs, remote I/O modules, IP cameras, transportation equipment or utility devices across copper and multimode fiber segments. It is a network communication switch, not a router, managed network switch, PLC, power supply, field sensor or media converter as a separate device.

Port and Fiber Specifications

The switch provides four 10/100Base-T(X) RJ45 copper ports with Auto MDI/MDIX and two 100Base-FX multimode fiber ports with SC connectors. Multimode fiber supports 50/125 µm or 62.5/125 µm fiber diameter. Fiber transmission distance is 2 km at 1310 nm wavelength. Fiber optical output power upper limit is minus 14 dBm and lower limit is minus 23.5 dBm according to the datasheet. Ethernet standards include IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-T(X) and 100Base-FX, and IEEE 802.3x flow control. The MAC address table holds 1024 entries.

Power Input and Protection

The switch uses dual redundant 12 to 48 V DC power inputs on a six-pin terminal block, with automatic failover between supplies. Typical power consumption is approximately 5 W. The device includes overload current protection and reverse polarity protection. A relay alarm output rated 1 A at 24 V DC is provided for power failure notification, signaling PWR1 or PWR2 supply loss to an external PLC, alarm panel or monitoring system. The redundant power design supports continuous network operation when one power source fails.

Mechanical Construction and Environmental Rating

The IES-1042FX-MM-SC uses an IP30 rated metal housing for mechanical protection in control cabinets and field enclosures. Dimensions are approximately 26 mm width, 95 mm depth and 144.3 mm height, with typical weight around 378 g. Mounting options include DIN rail and wall or panel mounting. Operating temperature ranges from minus 40 to plus 70 degrees Celsius, and storage temperature ranges from minus 40 to plus 85 degrees Celsius. Operating humidity is 5 to 95 percent relative humidity non-condensing. The fan-less design relies on conduction and natural convection for continuous operation.

Status Indicators and Diagnostics

The switch provides two green power LEDs, a yellow fault LED, and RJ45 port LEDs with green link or activity indication and yellow duplex or collision indication. Fiber and copper port LEDs indicate link and network activity during operation. The fault relay and LED status support power-supply and network fault diagnosis in distributed industrial installations.

Standards and Reliability

The IES-1042FX-MM-SC complies with FCC Part 15 Class A, EN55022 Class A, EN61000-4-2, 3, 4, 5, 6, 8 and 11 immunity tests, IEC 60068-2-27, -32 and -6 mechanical tests, and EN60950 safety standard according to the product documentation. It carries CE and FCC approval and RoHS compliance. The product is backed by a five-year warranty according to the ORing datasheet.

Typical Application Scenarios

Typical applications include factory automation networks connecting PLCs, HMIs and Ethernet I/O modules on production lines; transportation systems such as traffic control, railway signaling or vehicle monitoring; surveillance networks integrating IP cameras and NVRs; utility and substation automation; SCADA communication; renewable energy monitoring; smart city and building automation systems. The multimode fiber ports extend network reach up to 2 km between remote nodes or control cabinets where copper cable distance or electrical noise requires fiber isolation.

Installation and Commissioning Notes

Installation should follow the ORing IES-1000 series quick installation guide and industrial network wiring practices. Mount the switch on DIN rail or panel bracket, connect the dual DC power inputs to redundant supplies, verify reverse polarity and overload protection wiring, connect RJ45 copper devices and SC multimode fiber patch cords, and check power, fault and port LEDs after power-up. Use matching multimode fiber patch cords at 1310 nm, keep fiber connectors clean, and route network and power wiring according to EMC guidance. Because the switch is unmanaged, no IP address, VLAN or switching configuration is required; verify link speed, link activity and alarm relay operation after commissioning.

Advantages and Selection Notes

The IES-1042FX-MM-SC offers four 10/100 copper ports, two 100Base-FX multimode SC fiber ports, plug-and-play unmanaged operation, store-and-forward switching, dual redundant DC power inputs, reverse polarity and overload protection, relay alarm output, IP30 metal housing, wide minus 40 to plus 70 degree Celsius temperature range, fan-less compact construction and DIN rail or panel mounting. When selecting a replacement, confirm multimode versus single-mode fiber, SC connector type, port count, power input voltage, relay alarm requirement, mounting arrangement and environmental rating. The IES-1042FX-MM-SC is an industrial Ethernet switch, not a managed switch, router, media converter standalone, PLC or power supply; its role is to extend and bridge industrial copper and fiber Ethernet networks in harsh environments.


Get a Quote