Description
MIRCOM TR-061 FX-2000: Fire Alarm Panel Power Transformer Product Description
Brand and Product Identification
The MIRCOM TR-061 is a power transformer associated with the Mircom FX-2000 Intelligent Analog Fire Alarm Control Panel. The TR prefix identifies a transformer component in the Mircom fire alarm panel internal power supply arrangement, 061 identifies the specific transformer model, and FX-2000 identifies the Mircom FleX-Net or FX-2000 fire alarm control panel family for which the transformer is used. Related replacement product references may appear as RPL-TR-061, described as a transformer replacement for a 6 ampere panel version. The TR-061 is an internal panel power component, not a fire alarm panel, detector, relay, annunciator or backup battery.
Product Function and System Role
The TR-061 transformer steps down the panel AC line voltage to the lower AC voltage required by the FX-2000 main power supply board, commonly identified in Mircom panel documentation as the MD-819 power supply board. The power supply board then rectifies and regulates the panel DC supply, charges the 24 V DC standby battery, and provides power to the fire alarm control unit circuits, modules, sensors, notification appliance circuits and panel electronics. The transformer is installed inside the FX-2000 panel enclosure and works with the panel power supply board, battery charger, fuse protection and ground connections.
FX-2000 Panel Power Context
The FX-2000 base panel includes either a 6 or 12 ampere power supply. Power supply ratings in the FX-2000 manual list AC line voltage of 120 V at 60 Hz or 240 V at 50 Hz, with primary current and secondary maximum current depending on chassis version. Battery backup uses a 24 V DC gel-cell or sealed lead-acid battery, with charging current limited to a maximum of 3 A according to the panel specifications. The green AC On LED, battery trouble indication and common trouble indication reflect panel AC and battery supply status during operation. The TR-061 transformer supports the AC supply conversion stage within this overall charging and standby power arrangement.
Electrical and Installation Position
The TR-061 mounts as an internal chassis or main-board component within the FX-2000 enclosure, alongside the MD-819 power supply board and optional modules such as the PR-300 polarity reversal and city tie module. The RPL-TR-061 replacement reference is listed as a 120 V or 240 V transformer for a 6 ampere panel. Exact transformer primary and secondary voltage, winding current and fuse rating should be verified from the transformer label, FX-2000 manual and the specific chassis power supply rating before replacement. Fire alarm panel power wiring must follow local electrical codes, NFPA 72 or applicable local fire alarm standards, and the Mircom installation manual.
Typical Application Scenarios
Typical uses include replacement of an original TR-061 transformer in an existing Mircom FX-2000 fire alarm control panel, repair of a panel that fails AC power conversion, replacement during panel refurbishment, or spare part stocking for maintained fire alarm systems. The FX-2000 panel supports addressable analog sensors, addressable modules, conventional hardwire modules, relay modules and notification appliance circuits; the transformer itself serves only the internal AC to low-voltage power supply stage for those panel functions.
Installation and Replacement Notes
Replacement should be performed by qualified fire alarm or electrical personnel following the FX-2000 installation and operation manual and Authority Having Jurisdiction requirements. Disconnect AC power before working inside the panel, verify the original transformer model, primary and secondary voltage, chassis amperage rating and wiring position, and disconnect or observe battery polarity before service. Connect primary and secondary leads according to the original wiring diagram, check the power supply board fuse, AC ground connection and battery charger condition, and verify the AC On LED, trouble indications and panel normal status after restoration. Because fire alarm systems require standby operation, confirm battery standby capacity and panel charging performance after transformer replacement.
Advantages and Selection Notes
The TR-061 provides the AC voltage transformation stage required by the FX-2000 fire alarm panel power supply, enabling regulated panel DC operation and battery charging. When selecting a replacement, confirm panel model and chassis version, 6 or 12 ampere power supply version, primary line voltage, secondary transformer rating, fuse protection, compatibility with the MD-819 power supply board, and Mircom replacement part reference. The TR-061 is a panel internal transformer, not a complete fire alarm control panel, backup battery, detector, relay module, NAC circuit board, annunciator or external power supply; its role is to supply low-voltage AC to the FX-2000 internal power supply stage.
Get a Quote