Description

MOELLER PKZM0-4 DILM7: Motor-Protective Circuit-Breaker and Contactor Starter Combination Product Description

Brand and Product Identification

The MOELLER PKZM0-4 and DILM7 form an Eaton Moeller series motor starter combination consisting of a PKZM0-4 motor-protective circuit-breaker and a DILM7 three-pole contactor. The PKZM0 prefix identifies the PKZ fuseless motor-protective breaker series, and the -4 denotes a current adjustment range of 2.5 to 4 A. The DILM7 prefix identifies the DILM mini contactor series with a 7 A AC-3 rating. The contactor coil voltage and auxiliary contact arrangement depend on the full DILM7 ordering suffix, such as DILM7-10 or DILM7-01, and must be verified from the device label. This description covers the standard PKZM0 motor breaker and DILM contactor family pairing commonly used for direct-on-line motor starters.

Product Function and System Role

The PKZM0-4 provides motor overload protection and short-circuit protection in a single fuseless three-pole device, while the DILM7 contactor switches and isolates the motor load under control-circuit command. Together they form a compact direct-on-line starter: the control circuit energizes the contactor coil, the contactor main contacts connect supply voltage to the motor, and the breaker protects the motor winding and cables against overload and short-circuit conditions. The PKZM0 breaker is compatible with Eaton Moeller DIL contactors for direct mounting and starter combinations. The combination is a motor starting and protection assembly, not a soft starter, drive, PLC, sensor or overload relay separate from the breaker.

PKZM0-4 Breaker Specifications

The PKZM0-4 is a three-pole motor-protective circuit-breaker with an overload current adjustment range of 2.5 to 4 A. Rated operational power at AC-3, 380 or 400 V, 50 Hz is approximately 1.5 kW. The undelayed short-circuit release adjustment range is 62 A according to the published product data. Main-circuit connection uses screw terminals. The breaker actuator is a turn button. Dimensions are approximately 45 mm width, 93 mm height and 76 mm depth, with a net weight around 0.284 kg. Degree of protection is IP20. The device construction is fixed built-in technique for DIN rail or panel starter mounting.

DILM7 Contactor Specifications

The DILM7 is a three-pole Eaton Moeller DILM series contactor rated for 7 A at AC-3, 380 to 400 V, corresponding to approximately 3 kW motor power. Main contacts are three normally open poles. The standard DILM7-10 variant includes one normally open auxiliary contact, while other suffixes may include a normally closed auxiliary contact; the auxiliary configuration must be confirmed from the label. Coil supply versions include AC coils at voltages such as 42 V, 110 to 120 V, 220 to 240 V or 230 to 240 V, and DC coils such as 48 V DC, depending on ordering code. Contactors are designed for AC-3 and AC-4 motor switching duty, with screw terminals and compact construction matching the PKZM0 breaker width for starter stacking.

Protection and Coordination

The PKZM0-4 combines thermal overload release and magnetic short-circuit release for motor branch protection. The DILM7 contactor carries the motor running current and interrupts the controlled motor circuit when the coil is de-energized. In a coordinated starter, the breaker handles short-circuit clearing and overload tripping, while the contactor performs normal switching and stop command isolation. Short-circuit rating, auxiliary switch options, undervoltage release or busbar accessories are model- and accessory-specific and should be selected from the Eaton Moeller PKZ and DILM datasheets for the installed application.

Mechanical and Terminal Arrangement

Both devices are designed for compact DIN rail mounting in a motor control starter arrangement. PKZM0 screw terminals accept the wire capacity specified for the breaker rating, and DILM7 screw terminals accept main and control circuit wiring according to the contactor datasheet. The PKZM0 and DILM series are mechanically compatible for direct starter mounting, with connection through the supply and motor terminals. Accessories such as auxiliary switches, undervoltage releases, busbar covers or star-delta or reversing kits are added according to the starter configuration.

Typical Application Scenarios

Typical applications include direct-on-line starting of small three-phase motors on conveyors, pumps, fans, compressors, machine tools, packaging machines, mixers, drills and other industrial machines with motor power within the 1.5 kW breaker rating and 3 kW contactor rating. The combination suits 2.5 to 4 A motor branches where overload and short-circuit protection, local or remote stop control, and compact starter construction are required. It is commonly installed in control cabinets, machine panels and motor control centers.

Installation and Wiring Notes

Installation should follow the Eaton Moeller PKZM0 and DILM7 datasheets, IEC or EN 60947-4-1 motor starter standards, and local electrical codes. Mount the breaker and contactor on DIN rail, connect the supply lines to the breaker input, connect the breaker output to the contactor main contacts, and connect the motor to the contactor load terminals. Wire the contactor control coil according to the coil voltage marked on the device, and connect auxiliary contacts to the control or PLC feedback circuit as required. Set the breaker overload dial to match the motor full-load current. Verify coil voltage, auxiliary contact type, phase sequence, earth protection and starter coordination before energizing.

Advantages and Selection Notes

The PKZM0-4 and DILM7 combination offers compact fuseless motor protection, three-pole contactor switching, compatibility between Eaton Moeller PKZ breakers and DIL contactors, DIN rail mounting, screw terminals and proven industrial starter construction. When selecting or replacing devices, confirm breaker current range, contactor AC-3 current and kW rating, coil voltage and frequency, auxiliary contact arrangement, main contact configuration, enclosure rating and compatibility with existing starter busbars or wiring. The PKZM0-4 is the protection device and the DILM7 is the switching contactor; together they form a motor starter, not a variable speed drive, soft starter, PLC, overload relay in a separate enclosure or field sensor.


Get a Quote