Description

CUTLER-HAMMER HMCPS015E0C: HMCP Motor Circuit Protector Product Description

Brand and Product Identification

The CUTLER-HAMMER HMCPS015E0C is a three-pole molded case motor circuit protector from the Eaton Cutler-Hammer HMCP Series C product family. The catalog number HMCPS015E0C identifies an HMCP motor protector rated 15 A continuous, with the S variant for use with motor starters equipped with electronic overload relays, E cam trip setting, three-pole construction and copper body terminals. Cutler-Hammer motor protection products are now manufactured and supported under the Eaton brand, while the legacy Cutler-Hammer name remains common in replacement part listings.

Product Function and Protection Purpose

The HMCPS015E0C provides instantaneous magnetic-only short-circuit protection for motor branch circuits in combination with a motor starter and overload relay. Unlike a thermal-magnetic general-purpose breaker, the HMCP MCP does not provide the motor running overload function; overload protection is supplied by the motor starter overload relay or electronic overload device. The protector trips instantaneously on short-circuit or severe overcurrent, isolating the motor branch circuit while allowing normal motor starting current to pass without nuisance tripping.

Electrical Ratings

The HMCPS015E0C is rated 15 A continuous at 600 V AC maximum and 250 V DC maximum. It is a three-pole breaker with toggle actuator and free-standing or panel mounting according to the application. The MCP trip setting for the E cam corresponds to a motor full-load current range of 3.4 to 4.5 A, with a magnetic trip setting of 45 A. DC application trip levels are approximately 40 percent higher than the listed AC values, and interrupting ratings depend on the motor starter with which the protector is applied.

Catalog Number Meaning

In HMCPS015E0C, HMCP identifies the Cutler-Hammer Series C motor circuit protector family. The S indicates the special MCP version for starters equipped with electronic overload relays. 015 indicates 15 A continuous rating. E identifies the trip cam setting used to match the selected motor FLA range. The terminal C suffix indicates copper body terminals on the HMCPS 3 to 100 A frame. Related non-S HMCP015E0C versions are used with conventional motor starters, while the S version is matched to electronic overload starter applications.

Construction and Wiring

The breaker uses a molded case housing with line and load side steel or copper body terminals for field wiring. The three poles share the breaker mechanism and magnetic trip units for the motor branch phases. The HMCPS 3 to 100 A models come with line and load steel body terminals, and the catalog suffix identifies terminal material. Wiring must match the line and load markings, with conductor size, lug torque and protection coordination selected according to the Eaton manual and local electrical code.

Standards and Application Type

The HMCP motor circuit protector is designed to comply with applicable UL 489, CSA C22.2 No. 5.1 and IEC 157-1 requirements, and carries CE marking where applicable. It is a recognized component for motor branch circuit protection in combination with a listed starter. The MCP is intended for motor circuit protection, not general lighting or feeder protection where thermal overload and full branch-circuit protection functions are required from the breaker alone.

Typical Application Scenarios

Typical applications include three-phase motor starters for pumps, fans, compressors, conveyors, machine tools, mixers, packaging machinery, material handling equipment and industrial process drives. The HMCPS variant is selected when the motor starter uses an electronic overload relay rather than a thermal overload heater. Common installations are NEMA Size 0 motor starters matched to the 3.4 to 4.5 A FLA range, with the protector providing short-circuit protection and the starter relay providing running overload protection.

Installation and Coordination Notes

Installation and sizing should follow the Eaton HMCP product literature, NEC or local electrical codes, motor manufacturer data and starter combination ratings. Verify the motor FLA, starter size, overload relay type, supply voltage and short-circuit available current before selecting the breaker. The protector trip cam must match the motor full-load current range, and the starter-MCP combination must have an adequate interrupting rating for the available fault current. After installation, check toggle operation, terminal torque, phase assignment and coordination between the protector and overload device.

Advantages and Selection Notes

The HMCPS015E0C offers a compact three-pole MCP for motor branch protection, instantaneous magnetic trip, 15 A frame rating, E cam setting matched to low FLA motors, electronic overload starter compatibility and Eaton Cutler-Hammer replacement availability. When selecting a replacement, distinguish the S electronic overload variant from the standard HMCP version, confirm pole count, voltage, terminal type and trip cam, and verify starter combination interrupting rating. The HMCPS015E0C is a motor circuit protector, not a contactor, overload relay, soft starter, general feeder breaker or motor controller; its role is to provide short-circuit protection for a motor branch circuit in combination with the starter and overload device.


Get a Quote