Description

已思考

VICKERS 02-104808: Power Amplifier Card Holder for Proportional Hydraulic Control Product Description

Brand and Product Identification

The VICKERS 02-104808 is a power amplifier holder, also described as an amplifier module card holder or electronics card holder, for Vickers proportional hydraulic control systems. The part number 02-104808 belongs to the Vickers accessory group associated with EEA-PAM series power amplifiers used with proportional directional and pressure control valves. Related holder or card part numbers in the same group include 02-104806, 02-104807 and appended suffix variants such as 02-104808-A through 02-104808-Z. Vickers hydraulics is now associated with Eaton and Danfoss heritage, but this part is commonly listed under the original Vickers or Sperry Vickers name.

Product Function and System Role

The 02-104808 power amplifier holder is a mechanical and electrical mounting carrier for a Vickers proportional control amplifier card, commonly an EEA-PAM-5 series Eurocard or DIN-rail mount amplifier. It holds the amplifier card in the hydraulic control panel, provides the connector interface between the card and external wiring, and maintains the amplifier module in its designated mounting position. The holder itself does not generate the proportional valve drive signal; the amplifier card installed in the holder performs signal conditioning, PID or ramp functions, and PWM or current drive to the proportional valve solenoid.

Associated Amplifier and Valve Platform

Vickers EEA-PAM power amplifiers are designed for proportional control valves such as KCG, KTG4V, KXCG and related proportional directional or pressure valves. EEA-PAM-5-A-32 amplifiers drive proportional valve solenoids, EEA-PAM-5-B-33 amplifiers add ramp generator and quadrant detection functions, and EEA-PAM-5-D-32 amplifiers include integrated PID modules. The 02-104808 holder is selected to match the specific EEA-PAM card format and valve series, so compatibility must be confirmed from the amplifier model, valve catalog number and holder part number before replacement.

Mechanical Construction and Dimensions

The 02-104808 is an electronics module holder with listed package dimensions of approximately 7 in by 5.5 in by 2.5 in according to industrial parts listings. The holder includes card guides or slots, retaining hardware and the backplane or mating connector arrangement required to seat the amplifier card. It is intended for panel or rail mounting in a hydraulic control enclosure, with external field wiring connected to the holder terminals or connector rather than directly to the exposed amplifier card pins.

Typical Application Scenarios

Typical uses are found in industrial hydraulic systems that use Vickers proportional valves for direction, flow or pressure control. Common installations include machine tools, injection molding machines, presses, mobile and industrial machinery, material handling equipment, coil handling, test rigs, and automated production lines where hydraulic actuator position, pressure or speed is proportionally controlled. The holder appears in legacy Vickers or Sperry Vickers amplifier cards used in retrofitted or maintained hydraulic control panels.

Installation and Wiring Notes

Installation should follow the Vickers proportional amplifier and valve documentation. Mount the holder in the control enclosure, connect external supply, command signal, feedback, enable and valve solenoid wiring to the designated terminals or connector, then seat and retain the amplifier card. Verify card orientation, connector engagement, grounding and shielding before energizing. When replacing a holder, transfer or verify the original amplifier card model, valve model and wiring assignment, because the holder and amplifier combination determines the correct proportional control function.

Advantages and Selection Notes

The 02-104808 provides a dedicated mounting carrier and wiring interface for Vickers proportional amplifier cards, protecting the card connector and simplifying module replacement in hydraulic control panels. Because this is an older hydraulic accessory, availability may be limited to surplus, used or remanufactured stock. When selecting a replacement, confirm the EEA-PAM amplifier type, proportional valve model, holder suffix, connector type and mechanical mounting arrangement. The 02-104808 is a card holder or amplifier mounting accessory, not a proportional amplifier, hydraulic valve, solenoid, power supply or controller; its role is to mount and interface the amplifier card within the hydraulic control system.


Get a Quote