TELEMECANIQUE ABL1RPM24062 000015201 Product Description

Overview

TELEMECANIQUE ABL1RPM24062 000015201 is a regulated switch-mode power supply from the Schneider Electric Phaseo ABL1 series. TELEMECANIQUE ABL1RPM24062 000015201 accepts single-phase universal AC input and provides stabilized 24 V DC, 6.2 A (150 W) output for industrial automation control circuits. 000015201 is the unique serial number for inventory tracking and spare identification. This unit is end-of-life and widely stocked as a legacy replacement part for control cabinets.

Features

TELEMECANIQUE ABL1RPM24062 000015201 supports wide input voltage of 85–132 V AC and 170–264 V AC, 47–63 Hz. It delivers tight regulation of ±3% for line and load variation, with residual ripple lower than 200 mV and typical efficiency up to 80%. Built-in protection functions include overload, overvoltage, short-circuit auto-recovery and thermal shutdown. A front green LED indicates normal output status for quick on-site inspection. The unit is designed for panel mounting and can be fitted with optional DIN rail adapters. It meets IEC 61000 EMC standards for high noise immunity in industrial environments. The recommended successor model is ABLP1A24062.

Specs

Brand: TELEMECANIQUE (Schneider Electric) Model: ABL1RPM24062 Serial code: 000015201 Product series: Phaseo ABL1 Product category: Regulated switch-mode power supply Input: Single phase 85–132 V AC / 170–264 V AC, 47–63 Hz Output: 24 V DC, 6.2 A, 150 W Voltage regulation: ±3% Efficiency: 80% Protection: Overload, overvoltage, short-circuit, over-temperature Terminals: Screw type Mounting: Panel mount, DIN rail via accessory Lifecycle: Discontinued Replacement part: ABLP1A24062

Principle

TELEMECANIQUE ABL1RPM24062 000015201 converts AC mains voltage into DC power through high-frequency switching topology. The internal closed-loop control circuit maintains stable 24 V DC output despite input fluctuation and load changes. When overload or short-circuit faults occur, the protection circuit limits or cuts off output automatically. The power supply resumes normal operation after the fault condition is removed.

Applications

TELEMECANIQUE ABL1RPM24062 000015201 supplies 24 V DC power for PLC, proximity sensors, safety relays, solenoid valves and small actuators. Typical applications include packaging machinery, conveyor lines, water treatment skids, material handling equipment and general low-voltage automation cabinets. It is used for new cabinet assembly and maintenance replacement of existing Phaseo ABL1 power systems.