TELEMECANIQUE ABL1RPM24062 000013763 Product Description

Overview

TELEMECANIQUE ABL1RPM24062 000013763 is a regulated switch-mode power supply of the Schneider Electric Phaseo ABL1 series. TELEMECANIQUE ABL1RPM24062 000013763 accepts single-phase universal AC input and delivers 24 V DC 6.2 A (150 W) stabilized output for industrial control systems. 000013763 is the internal serial identifier for stock traceability. This model is end-of-life, widely stocked as a legacy spare part for automation cabinet replacement.

Features

TELEMECANIQUE ABL1RPM24062 000013762 supports wide input range 85–132 V AC / 170–264 V AC, 47–63 Hz. It achieves up to 80% efficiency with +/-3% line and load regulation, residual ripple below 200 mV. It integrates comprehensive protection including overload (1.1–1.5×In), overvoltage, short-circuit auto-recovery and thermal shutdown. A green status LED indicates healthy output voltage. The unit supports panel mounting or optional DIN rail adapter installation. It complies with CE and IEC 61000 EMC standards for industrial noise immunity. The recommended replacement part is ABLP1A24062.

Specs

Brand: TELEMECANIQUE (Schneider Electric) Model: ABL1RPM24062 Serial code: 000013763 Product series: Phaseo ABL1 Product category: Regulated SMPS power supply Input: Single phase 85–132 V AC / 170–264 V AC, 47–63 Hz Output: 24 V DC, 6.2 A, 150 W Regulation: +/-3% Efficiency: 80% Protection: Overload, overvoltage, short-circuit, over-temperature Terminals: Screw type Mounting: Panel mount, DIN rail via accessory Lifecycle: Discontinued Replacement: ABLP1A24062

Principle

TELEMECANIQUE ABL1RPM24062 000013763 converts universal AC mains into stable 24 V DC via high-frequency switching topology. The internal control loop maintains constant output voltage against input fluctuation and load variation. When overload or short-circuit occurs, the power supply activates protection and cuts or limits output. It automatically recovers after the fault condition is cleared.

Applications

TELEMECANIQUE ABL1RPM24062 000013763 supplies 24 V DC power for PLC, sensors, safety barriers, relays and small actuators. Typical applications include packaging machines, material handling lines, water treatment skids and general low-voltage automation cabinets. It is used for new cabinet build and maintenance spare replacement of existing Phaseo ABL1 power systems.