TEMPEST KC-XJ5W S/N: TI20190617 Projector Enclosure Controller

Overview

The TEMPEST KC-XJ5W S/N: TI20190617 is an intelligent temperature control controller for Tempest outdoor projector protective enclosure systems. The TEMPEST KC-XJ5W S/N: TI20190617 monitors internal enclosure temperature, humidity and fan status, and automatically controls heating, cooling and dehumidification equipment to keep the built-in projector working within safe temperature range. It supports RS485 communication for remote status upload and alarm output to the upper monitoring system. The TEMPEST KC-XJ5W S/N: TI20190617 is an original spare control unit for outdoor laser projector housings, widely used for maintenance and replacement of landscape projection and outdoor media display projects.

Features

The TEMPEST KC-XJ5W S/N: TI20190617 supports adjustable temperature threshold for cooling and heating start-stop, with anti-condensation dehumidification logic. It integrates multiple fault detection functions including fan failure, temperature sensor breakage and over-temperature alarm, and provides dry contact alarm output. The TEMPEST KC-XJ5W S/N: TI20190617 has a wide 24VDC power supply range and surge protection to adapt to outdoor cabinet power environment. It matches the wiring terminal definition of the original Tempest enclosure assembly, supporting direct plug-in replacement without modifying the cabinet wiring. The TEMPEST KC-XJ5W S/N: TI20190617 stores running log and fault records for on-site troubleshooting.

Specs

Device Type: Enclosure temperature and humidity controller Model: TEMPEST KC-XJ5W Serial Number: TI20190617 Power Supply: 24 VDC Control Output: Fan, heater, cooler relay output Communication: RS485 Sensor: Temperature and humidity sensor input Diagnosis: Sensor fault, fan fault, over-temperature alarm, LED status indicator Mounting: DIN rail inside projector enclosure cabinet Protection Grade: IP20 Application: Outdoor projector protective housing, landscape laser projection, outdoor media display, weatherproof projection system

Principle

The TEMPEST KC-XJ5W S/N: TI20190617 reads real-time temperature and humidity data from the sensors installed inside the sealed projector enclosure. The internal control logic compares measured values with preset thresholds. When the internal temperature is too high, it activates the cooling fan or cooling unit; when the temperature is too low, it turns on the heater. When humidity rises, the dehumidification sequence is triggered. The TEMPEST KC-XJ5W S/N: TI20190617 continuously checks sensor and actuator status. If abnormality is detected, it activates the alarm relay and sends fault message to the remote monitoring platform.

Applications

The TEMPEST KC-XJ5W S/N: TI20190617 is used for environmental control of Tempest weatherproof projector enclosures for scenic projection, building projection and outdoor advertising display. It serves constant temperature and anti-condensation protection for high-brightness laser projectors deployed in open-air environments. The TEMPEST KC-XJ5W S/N: TI20190617 applies to spare stock and emergency repair of existing Tempest enclosure environmental control systems. It also supports renovation of outdoor projection cabinet assemblies.