TRUMPF CLH100 1612517V08 Laser Control Head Unit

Overview

The TRUMPF CLH100 1612517V08 is a dedicated laser control head unit for TRUMPF laser cutting and welding systems. The TRUMPF CLH100 1612517V08 integrates optical path monitoring, sensor signal processing and drive logic for laser head axis control, used to coordinate laser emission, height tracking and nozzle protection during machining cycles. It communicates with the machine CNC controller via internal bus and feeds back process status and fault information. The TRUMPF CLH100 1612517V08 is an original spare assembly for maintenance and replacement of TruLaser series fiber laser machines.

Features

The TRUMPF CLH100 1612517V08 supports capacitive height sensing for automatic distance control between nozzle and workpiece. It provides fast signal response for collision detection and rapid lift protection to avoid damage to optical components and cutting head. The TRUMPF CLH100 1612517V08 includes built-in diagnostic circuits for cable continuity, sensor offset and internal hardware error. It adopts compact housing structure and matched plug connectors for fast field replacement. The TRUMPF CLH100 1612517V08 follows the original firmware and interface definition, compatible with the same series laser machine control architecture.

Specs

Device Type: Laser control head unit Model: TRUMPF CLH100 1612517V08 Function: Capacitive height tracking, collision detection, laser head signal conditioning Interface: Internal machine bus, sensor input, actuator output Mounting: Integrated inside laser cutting head assembly Protection Grade: Industrial sealed design Application: TruLaser fiber laser cutting machine, laser welding system

Principle

The TRUMPF CLH100 1612517V08 continuously collects capacitive sensor signals from the cutting nozzle to calculate the gap between nozzle and metal sheet. It sends gap deviation signals to the Z-axis drive system to maintain stable cutting height. When sudden collision or abnormal signal jump occurs, the TRUMPF CLH100 1612517V08 triggers emergency lift and laser stop signal, meanwhile uploading fault codes to the machine HMI for alarm display. The module runs self-check during power-up and reports hardware failure to the CNC system if abnormality is found.

Applications

The TRUMPF CLH100 1612517V08 is used for laser height control and collision protection in sheet metal fiber laser cutting equipment. It serves real-time process monitoring for thin plate and thick plate cutting production lines. The TRUMPF CLH100 1612517V08 applies to spare stock and emergency repair of existing TRUMPF TruLaser laser machines. It also supports cutting head overhaul and optical system maintenance projects.