COGNEX IS5401-00 800-5838-4 In-Sight 5401 Machine Vision System

Overview

The COGNEX IS5401-00 800-5838-4 is a fixed-mount industrial vision system from Cognex In-Sight 5000 series. The COGNEX IS5401-00 800-5838-4 uses CCD image sensor and built-in vision tools to perform part presence check, dimension measurement, defect detection, pattern matching and OCR reading. It is programmed via In-Sight Explorer software and supports industrial communication and digital I/O for integration with PLC and automation equipment. The COGNEX IS5401-00 800-5838-4 is an older legacy model and is commonly stocked as spare replacement part for existing production inspection stations.

Features

The COGNEX IS5401-00 800-5838-4 supports a complete set of In-Sight vision tools for inspection, gauging and identification tasks. It provides 640 × 480 resolution CCD sensor for stable image acquisition on factory lines. The COGNEX IS5401-00 800-5838-4 has configurable digital input and output for trigger signal and pass/fail result output. It supports Ethernet communication for job download, image logging and data upload to host systems. The COGNEX IS5401-00 800-5838-4 adopts rugged industrial housing and compact structure for continuous long-time operation.

Specs

Device Type: Fixed mount machine vision system Model: COGNEX IS5401-00 800-5838-4Series: In-Sight 5000 series, In-Sight 5401 Image Sensor: 1/3-inch CCD Max Resolution: 640 × 480 pixels Software: In-Sight Explorer Interface: Ethernet, digital I/O Mounting: Standard fixed mounting bracket Status: Discontinued legacy vision unit Application: Industrial quality inspection

Principle

The COGNEX IS5401-00 800-5838-4 receives trigger signal and captures the target workpiece image. The internal processor runs pre-configured vision algorithms to locate features, measure dimensions or verify defects. After inspection completes, the COGNEX IS5401-00 800-5838-4 outputs inspection result and I/O status, and transmits data or image logs over Ethernet.

Applications

The COGNEX IS5401-00 800-5838-4 is used for assembly verification and defect inspection on electronic assembly lines. It undertakes part measurement and pattern matching for automotive component inspection. The COGNEX IS5401-00 800-5838-4 applies to packaging quality check and label verification. It also serves spare replacement and maintenance of existing In-Sight 5401 vision stations.