TELEDYNE DALSA G3-GC11-C1920 S1104326

Overview

TELEDYNE DALSA G3-GC11-C1920, serial trace code S1104326, is a color area-scan industrial machine vision camera from the Genie Nano‑1GigE series. It adopts Sony Pregius IMX249 global shutter CMOS sensor, delivers stable color image capture for high-speed moving objects, widely supplied as exchange spare for automated inspection station, packaging line, electronics AOI and traffic vision system overhaul and replacement.

Features

TELEDYNE DALSA G3-GC11-C1920 features global electronic shutter, eliminating motion blur for fast-moving targets. It supports Teledyne DALSA proprietary TurboDrive compression technology to boost effective throughput over standard GigE bandwidth. Onboard 90 MB image buffer supports burst capture and temporary frame storage. ROI and multi‑ROI functions reduce data volume and shorten transmission latency.

TELEDYNE DALSA G3-GC11-C1920 complies with GigE Vision v1.2 and GenICam standards. It supports PoE or 10–36 VDC direct power supply. Isolated general-purpose I/O includes 2 digital inputs and 2 digital outputs for trigger, strobe and pass/fail signal handshake with PLC or vision controller. Manual and auto gain, auto white balance, LUT and gamma correction are configurable. It works with Sapera LT, CamExpert and third-party GenICam-compliant vision software. The compact all-metal housing supports wide temperature range and industrial vibration resistance.

Specs

TELEDYNE DALSA G3-GC11-C1920Platform: Teledyne DALSA Genie Nano‑1GigE Type: color global shutter GigE vision camera Catalog number: G3-GC11-C1920 Serial number: S1104326 Sensor: Sony IMX249, 1/1.2” format Resolution: 1936 × 1216 (2.3 MP) Pixel size: 5.86 µm Standard frame rate: 38.8 fps Bit depth: 8-bit / 12-bit Lens mount: C-mount (CS-mount optional) Interface: GigE Vision (RJ45), isolated I/O Power: PoE or 10–36 VDC Operating temperature: -20 °C ~ +65 °C Dimension: 44 × 29 × 21 mm Weight: 46 g This is not a lens, light source or vision controller; it is a complete color GigE industrial camera for machine vision acquisition. TELEDYNE DALSA G3-GC11-C1920 is widely supplied as service replacement spare for visual inspection and image acquisition system failure.

Principle

TELEDYNE DALSA G3-GC11-C1920 receives hardware or software trigger signal, then exposes the CMOS sensor with global shutter to capture the full frame simultaneously. Raw Bayer color data is processed inside the camera, optionally compressed by TurboDrive, then transmitted over Gigabit Ethernet to the host vision PC. Onboard I/O synchronizes illumination and external automation signals. Camera internal firmware monitors exposure, temperature and link status, and reports diagnostic flags to the host software.

Applications

TELEDYNE DALSA G3-GC11-C1920 is deployed for PCB and electronics AOI inspection, packaging quality check, food sorting, parts metrology and intelligent traffic capture. It is selected for spare inventory and vision station retrofit projects for existing Genie Nano GigE machine vision systems.