Foxboro P0916FH Termination Cable Operation & Specification Manual

1. Basic Product Information

• Brand: Foxboro (Schneider Electric)

• Model No.: P0916FH

• Product Category: Type 4 Baseplate-to-TA Termination Cable

• Standard Length: 1 Meter (3.28 ft)

• Outer Sheath Material: Flame-retardant P/PVC

• Matching Equipment: I/A Series FBM2xx I/O Modules, P0916EV Control Processor, P0916NG/P0916PY Terminal Assemblies

• Origin: United States

• Net Weight: 0.12kg

• Outer Cable Diameter: 6.2mm

2. Electrical & Structural Core Parameters

1. Internal Structure: Multi-pair twisted signal cores, dual-layer comprehensive shielding

2. Connector: 37-pin male/female D-Sub lockable plug at both ends, anti-loose screw fixing

3. Circuit Standard: Type 4 Class 2 limited energy circuit (≤60VDC, ≤30VAC, ≤100VA)

4. Insulation Withstand Voltage: 500V AC insulation withstand test

5. Transmission Performance: Max 1Mbps fieldbus differential signal transmission, 100Ω characteristic impedance matching

6. Insulation Resistance: ≥1000 MΩ·km

7. Mechanical Bending Life: ≥10,000 times cyclic bending without core breakage

3. Environmental Adaptability Parameters

• Operating Temperature: -20℃ ~ +70℃

• Storage Temperature: -40℃ ~ +85℃

• Relative Humidity: 5%–95% non-condensing

• Industrial Grade: G3 anti-corrosion, dust-proof

• Flame Retardancy: Self-extinguishing P/PVC sheath, meets industrial low-smoke flame retardant requirements

4. Installation & Operation Guidelines

1. Standard Wiring Operation Steps

   Step1: Cut off all power supply of DCS rack modules before plugging/unplugging to avoid signal short circuit and module burnout

   Step2: Align the 37-pin D-Sub pin port with the baseplate/FBM interface, fully insert and tighten locking screws to eliminate loose contact

   Step3: Separate P0916FH signal cable from high-current power cables, maintain ≥15cm isolation distance inside cabinets

   Step4: Fix cable body with soft cable ties to avoid long-term tension pulling connectors

   Step5: Complete all wiring, restore power supply and run system self-test to verify communication status

2. Full Compatibility List

   FBM Modules: FBM201, FBM202, FBM204, FBM214, FBM217, FBM224 all FBM2xx series;

   Matching Termination Assemblies: P0916NG, P0916PY;

   Control Processors: P0916EV, CP40B, CP60, CP30

3. Daily Maintenance Specifications

   • Strictly prohibit hot plugging under live circuit

   • Inspect connector pin oxidation, sheath abrasion and wire aging every 6 months

   • Do not arbitrarily cut, splice or replace with non-original connectors

4. Safety Warning

   Unauthorized modification, cutting or replacement of non-original connectors will cause signal attenuation, communication disconnection and permanent damage to I/O modules, and void the official product warranty.

5. Packaging & Warranty Terms

• Packaging: Independent anti-static sealed plastic bag + shockproof export carton

• Standard Warranty: 12 months from delivery date

4. Application Fields

1. Petroleum & Petrochemical Industry

   Medium-distance internal wiring inside DCS control cabinets of refineries, reaction furnaces and oil-gas gathering stations; signal connection between FBM modules and terminal assemblies across adjacent cabinets.

2. Thermal Power & New Energy Power Stations

   Inter-cabinet signal wiring for boiler, turbine auxiliary control cabinets; medium-length signal extension for wind power and photovoltaic distributed I/O racks.

3. Fine Chemical & Metallurgical Plants

   Signal transmission between control cabinets in high-temperature smelting workshops and acid-base reaction tank control rooms.

4. Pharmaceutical & Food Beverage Processing

   Medium-distance wiring of constant-temperature aseptic workshop DCS cabinets; signal connection for fermentation tanks and filling production line I/O terminal blocks.

5. Municipal Sewage & Tap Water Treatment

   Inter-cabinet signal wiring of centralized control rooms for sewage pump stations and water purification plants.

6. Pulp & Paper Manufacturing

   Medium-length signal connection of cooking tanks and drying line distributed control system cabinets.

7. General Intelligent Manufacturing

   Inter-cabinet signal wiring of automated production lines, packaging equipment and intelligent workshop DCS systems.

Information Certainty Statement

1. Confirmed Content: P0916FH is official 1m Type4 P/PVC termination cable for Foxboro I/A Series, dual shielded twisted pair, 37-pin D-Sub lock connector, Class2 Type4 circuit standard, G3 industrial environment adaptability, fully compatible with all FBM2xx modules and P0916EV main control card; all parameters are extracted from Schneider Foxboro official I/A Series hardware specification document.

2. Content To Be Verified On Site: Custom explosion-proof sheath special version parameters, cabinet wiring layout reserved space, customized special length ordering rules, need to be cross-checked with project construction drawings and official customized parts catalog.