Foxboro P0916FG Termination Cable Operation & Specification Manual

1. Basic Product Info

• Brand: Foxboro (Schneider Electric)

• Model: P0916FG

• Category: Type 4 Baseplate-to-TA Termination Cable

• Standard Length: 0.5 Meter (1.6ft)

• Outer Sheath Grade: P/PVC Flame Retardant

• Matching Device: I/A Series FBM2xx I/O Modules, P0916EV Control Processor, P0916NG Terminal Assembly

• Origin: United States

• Gross Weight: 0.08kg

• Standard Cable Diameter: 6.2mm

2. Core Electrical & Structural Parameters

1. Cable Structure: Multi-pair twisted core, aluminum foil individual shielding + copper braided overall double shielding

2. Connector: Original 37-pin male/female D-Sub anti-loosening locking plug at both ends

3. Circuit Standard: Type 4 Class 2 limited energy circuit (≤60VDC, ≤30VAC, ≤100VA)

4. Rated Withstand Voltage: 500V AC insulation withstand test

5. Transmission Bandwidth: Up to 1Mbps fieldbus signal transmission

6. Wave Impedance: 100Ω differential matching impedance

7. Insulation Resistance: ≥1000 MΩ·km

8. Bending Performance: ≥10,000 times cyclic bending without wire breakage

3. Environmental Specifications

• Operating Temperature: -20℃ ~ +70℃

• Storage Temperature: -40℃ ~ +85℃

• Relative Humidity: 5%–95% non-condensing

• Environmental Grade: G3 industrial anti-corrosion, dust-proof

• Flame Resistance: P/PVC flame retardant, self-extinguishing

4. Installation & Operation Guidelines

1. Standard Wiring Steps

   Step1: Cut off all rack power supply before plugging/unplugging the cable to avoid short-circuit damage to I/O modules

   Step2: Align the D-Sub pin interface with baseplate port, insert fully and fasten locking screws to prevent loose contact

   Step3: Route P0916FG separately from high-current power cables, maintain ≥15cm isolation distance inside cabinet

   Step4: Fix cable body with soft cable ties to eliminate long-term tension pulling connectors

   Step5: Complete all wiring and perform system self-test after power-on

2. Compatibility List

   Compatible with full I/A Series FBM modules: FBM201, FBM202, FBM214, FBM217, FBM224; Matched terminal assemblies: P0916NG, P0916PY; Compatible control cards: P0916EV, CP40B, CP60

3. Daily Maintenance Rules

   • Forbid hot plugging under live circuit

   • Check connector pin oxidation and sheath abrasion every 6 months

   • Do not cut, splice or replace non-original connectors arbitrarily

4. Safety Warning

   Unauthorized cable modification will cause signal attenuation, communication loss and module burnout, and void official product warranty.

5. Packaging & Warranty

• Package: Anti-static plastic sealed bag + independent carton

• Standard Warranty: 12 months counted from delivery date

4. Application Fields

1. Petrochemical & Oil-Gas Industry

   Short-distance internal wiring inside DCS control cabinets of refineries, reaction furnaces, oil & gas gathering stations; short connection between FBM modules and terminal assemblies.

2. Thermal Power & New Energy Power Plants

   Cabinet internal signal wiring for boiler, turbine auxiliary control cabinet; short-distance connection for wind/solar distributed I/O racks.

3. Fine Chemical & Metallurgical Plants

   Short signal transmission inside control cabinets of high-temperature smelting workshops, acid-base reaction tank control rooms.

4. Pharmaceutical & Food Processing Industry

   Internal wiring of constant-temperature aseptic workshop DCS cabinets, fermentation tank and filling line I/O short connection.

5. Municipal Water & Wastewater Treatment

   Short wiring of sewage pump station, water purification plant centralized control cabinet FBM modules.

6. Pulp & Paper Manufacturing

   Cabinet internal signal connection for cooking tank, drying line distributed control system.

7. General Intelligent Manufacturing

   Internal short-distance wiring of automated production line, packaging equipment DCS control cabinet.

Information Certainty Statement

1. Confirmed Content: P0916FG is official 0.5m Type4 P/PVC termination cable for Foxboro I/A Series, double shielded twisted pair, 37-pin D-Sub lock connector, Class2 Type4 circuit standard, G3 environment adaptability, fully compatible FBM2xx and P0916EV main control card, all data sourced from Schneider Foxboro official I/A Series hardware specification manual.

2. Content To Be Verified On Site: Custom special explosion-proof sheath version parameters, cabinet layout reserved wiring space, factory customized length ordering rules, need to match project construction drawings and official customized part catalog for confirmation.