FOXBORO P0916ET Operation & Specification Manual

1. Basic Product Information

• Brand: FOXBORO (Schneider Electric Automation)

• Model: P0916ET

• Product Category: Type 4 Termination Cable Assembly

• Standard Length: 15 Meters

• Cable Jacket Grade: P/PVC (Polyurethane outer jacket + PVC inner insulation)

• Matching Hardware: Full FBM2xx series Type 4 interface field modules; P0916 series terminal assembly bases

• Connector Standard: Dual-end 37-pin Foxboro dedicated D-Sub male/female integrated connectors

• Installation Standard: Cabinet internal trough wiring, fixed by cable ties, no sharp bending

2. Core Technical Parameters

1. Cable Internal Structure

   • Conductor: 24AWG stranded copper twisted pair, independent single-channel shielding

   • Outer Sheath: Wear-resistant, oil-proof, flame-retardant polyurethane

   • Flame Retardant Class: UL94-V0

2. Signal Transmission Performance

   • Supported Signals: 4–20mA current analog, 0–10V DC voltage, RTD thermal resistance, thermocouple, passive dry contact digital signals

   • Channel Isolation: 1500VAC inter-channel galvanic isolation

   • Transmission Delay: ≤0.8μs per signal channel

   • Maximum Signal Transmission Distance: 15m (rated design length)

3. Electrical & Environmental Indicators

   • Maximum Rated Signal Voltage: DC 36V

   • Operating Temperature Range: -20℃ ~ +80℃

   • Storage Temperature Range: -40℃ ~ +85℃

   • Relative Humidity: 5%–95% non-condensing

   • EMC Certification: IEC 61000-6-2 industrial heavy anti-interference standard

4. Mechanical Properties

   • Minimum Allowable Bending Radius: ≥10 times cable outer diameter

   • Tensile Resistance: Built-in tensile reinforcement wire core, suitable for long-term fixed cabinet wiring

   • Chemical Resistance: Resistant to mineral oil, weak acid and alkaline vapor in industrial workshops

3. Complete Compatibility List

1. Compatible FBM Field Modules

   FBM201, FBM202, FBM203, FBM204, FBM211, FBM214b and all Type 4 interface FBM2xx modules

2. Matching Termination Assemblies

   P0916AA, P0916CC, P0916FL, P0916 series DIN rail terminal bases

3. Adapted Control System

   Foxboro I/A Series Classic DCS, I/A Series Evo Distributed Control System

4. Installation & Wiring Operation Guide

1. Pre-wiring check: Confirm the FBM module adopts Type 4 interface to avoid pin definition mismatch and signal loss

2. Insert one end of P0916ET cable into the rear baseplate socket of FBM module, push firmly until the locking buckle clicks into place

3. Arrange the cable in the cabinet wiring trough, fix it loosely with cable ties; reserve enough margin for module disassembly and maintenance

4. Insert the other end of the cable into the corresponding terminal assembly base, align all 37 pins completely to prevent pin bending

5. Complete sensor and actuator wiring on the terminal board; use a multimeter to test for short circuit and open circuit of all signal loops before power-on

6. Separate this signal cable from high-voltage power cables and inverter output lines by more than 30cm to avoid cross-interference

5. Daily Inspection & Troubleshooting

• Routine Inspection Items: Cable sheath scratch/aging, connector looseness, cable extrusion deformation, abnormal signal fluctuation on the monitoring screen

• Common Faults & Solutions

  1. Unstable signal reading / signal loss: Re-plug both ends of the cable, check whether the connector lock is loose; inspect sheath damage causing short circuit

  2. Severe signal interference and large data jitter: Adjust wiring layout to stay away from high-power cables; re-ground the cable shielding layer reliably

  3. Connector pin bending or breakage: Replace the original P0916ET cable; self-modification of pins is prohibited

• Maintenance Reminder: Cut off all field signal power before unplugging the cable to avoid surge current damaging FBM core modules

6. Safety Warning

• Only certified professional automation engineers are allowed to install, replace and maintain this cable

• Arbitrary cutting, splicing and peeling of the cable internal shielding layer and wire core will invalidate the product warranty

• Do not drag, twist or pull the cable hard during disassembly to prevent internal wire breakage

• For explosion-proof hazardous production areas, lay the cable in sealed flame-retardant metal conduits in accordance with local explosion-proof specifications

4. Application Fields

1. Oil & Gas Industry

   Crude oil extraction platforms, refinery production lines, natural gas long-distance pipelines, oil depot storage and monitoring; transmit pressure, flow and liquid level sensor analog signals

2. Chemical & Petrochemical Industry

   Fine chemical synthesis reactors, raw material blending workshops, waste gas/waste water treatment stations; transmit thermocouple, RTD and 4–20mA closed-loop control signals

3. Power Generation Industry

   Thermal power plants, hydropower stations, photovoltaic and wind power new energy stations; turbine parameter collection, power distribution interlock digital signal wiring

4. Metallurgical Industry

   Steel smelting furnaces, non-ferrous metal refining production lines; furnace temperature, cooling water flow and roller speed long-distance signal transmission

5. Municipal Water Treatment

   Urban sewage treatment plants, tap water purification stations, industrial circulating water dosing systems; water quality monitoring and automatic dosing control signal transmission

6. Pharmaceutical & Biotech Industry

   Fermentation tank constant temperature control workshops, sterile pharmaceutical production lines; high-precision temperature analog signal stable transmission

7. Food & Beverage Processing

   Beverage filling lines, food sterilization and baking workshops; raw material ratio automatic adjustment and production interlock switch signal wiring

8. Pulp & Paper Industry

   Paper machine constant tension control, pulp cooking process monitoring; workshop cross-cabinet long-distance analog signal transmission

Reliability Statement