1. Core Technical Specifications

• Model: IDP10-AF1C01F

• Brand: Foxboro (Schneider Electric)

• Product Type: Differential Pressure Transmitter (for industrial process pressure measurement)

• Input Voltage: 24VDC～75VDC

• Output Parameters: 4-20mA standard signal; measuring range: 0.125kPa to 21MPa

• Protection Functions: Overvoltage, overcurrent, overheating, short-circuit protection

• Operating Temperature: -20℃ to +60℃

• Mounting: Process direct connection or bracket installation (optional)

• Protection Grade: IP66 (suitable for on-site process installation)

2. Brief Product Overview

3. Core Functional Features

• High Reliability: Adopts industrial-grade polysilicon sensor and corrosion-resistant materials, strong anti-interference, stable measurement and signal transmission, adapting to harsh industrial on-site environments.

• High Measurement Accuracy: Measurement accuracy up to ±0.05% of full scale, with good temperature stability, ensuring accurate data collection.

• Easy Installation: Supports process direct connection or bracket installation, with various process connection options, convenient for on-site installation and debugging.

• Configurable & Status Monitoring: Supports configuration via system, handheld configurator or PC software, with real-time status monitoring, facilitating quick troubleshooting.

4. Simplified Installation Instructions

4.1 Preparation

4.2 Key Installation Steps

1. Install the transmitter via process direct connection or mounting bracket, ensure it is firmly fixed, and the installation direction is consistent with the process medium flow direction.

2. Cut off the power supply, connect the 24VDC～75VDC power cable and 4-20mA signal cable to the corresponding terminals (pay attention to correct polarity).

3. Check wiring correctness and tightness, ensure no loose connections or short circuits.

4. Power on, check the transmitter status, perform parameter configuration if needed, and confirm that the output signal is stable and the measurement data is accurate.

4.3 Key Notes

• Install and wire by professional personnel, cut off power before operation to avoid electric shock and equipment damage.

• Ensure correct wiring polarity, reverse polarity may damage the module.

• Avoid installing in places with strong vibration or severe temperature changes, ensure good ventilation to ensure measurement accuracy.

• Do not disassemble the module without authorization, which will void the product warranty.