Product Description of Foxboro P0700DL Termination Cordset Assembly
P0700DL belongs to Foxboro I/A Series P0700 standardized prefabricated shielded termination cable family, specially developed as rear wiring harness for multi-channel discrete and analog hybrid FBM modules of Foxboro distributed control system. This integrated plug-cable assembly connects rear dedicated interface of cabinet-mounted FBM modules with cabinet terminal strips and field on-site instrumentation wiring, substituting scattered single-core manual wiring to effectively cut down wiring faults, inconsistent wiring definition and cabinet assembly cycle. Every finished product is implemented with factory continuity detection, AC dielectric withstand test and shielding performance aging inspection, ensuring stable transmission of 4–20mA analog signal, switch discrete signal and superimposed HART digital communication signal under cabinet environment with floating dust, slight oil mist and electromagnetic interference from nearby frequency converters and high-power drive equipment. All production revisions abide by unified Foxboro factory pin assignment and electrical design standard to guarantee full interchangeability during equipment maintenance and spare part replacement.
Description
Product Description of Foxboro P0700DL Termination Cordset Assembly
1. Product Introduction
P0700DL belongs to Foxboro I/A Series P0700 standardized prefabricated shielded termination cable family, specially developed as rear wiring harness for multi-channel discrete and analog hybrid FBM modules of Foxboro distributed control system. This integrated plug-cable assembly connects rear dedicated interface of cabinet-mounted FBM modules with cabinet terminal strips and field on-site instrumentation wiring, substituting scattered single-core manual wiring to effectively cut down wiring faults, inconsistent wiring definition and cabinet assembly cycle. Every finished product is implemented with factory continuity detection, AC dielectric withstand test and shielding performance aging inspection, ensuring stable transmission of 4–20mA analog signal, switch discrete signal and superimposed HART digital communication signal under cabinet environment with floating dust, slight oil mist and electromagnetic interference from nearby frequency converters and high-power drive equipment. All production revisions abide by unified Foxboro factory pin assignment and electrical design standard to guarantee full interchangeability during equipment maintenance and spare part replacement.
2. Basic Product Information
Fixed part number P0700DL is used uniformly for global order registration, warehouse classification and spare part stock management across all authorized Foxboro global distributors. The complete product consists of one injection-molded locking rear connector and fixed-length full-shield multi-core signal cable; plug housing adopts black high-temperature antistatic engineering plastic material, internal contact terminals are fully gold-plated to prevent oxidation and corrosion during long-term operation in humid closed control cabinet. Factory preset standard cable length is 1.4 meters, total net weight is around 0.33 kilogram. Rated working supply voltage is 24VDC, maximum allowable single-channel load current is below 500mA, fully matching conventional DCS cabinet DC power distribution specification. Original brand-new products are individually sealed inside anti-static packaging bags and included permanently into Foxboro global spare accessory catalog for new DCS cabinet pre-assembly construction and field damaged wiring replacement maintenance work.
3. Function and Product Positioning
Core functions cover accurate one-to-one pin mapping conversion for all analog and discrete signal channels of matched FBM modules, overall double-layer shielding isolation to restrain external signal crosstalk and common-mode interference, and fast snap-in plug-and-play installation for cabinet wiring construction. Built-in spring locking structure on molded connector firmly locks onto rear port of compatible FBM modules to avoid accidental disconnection triggered by long-period cabinet running vibration, while the opposite cable end is pre-stripped for direct screw fixing on cabinet terminal blocks to greatly improve wiring efficiency compared with traditional loose wiring scheme. Positioned as passive dedicated wiring accessory instead of functional control component within P0700 series product lineup, it focuses exclusively on standardized process signal transmission and wiring normalization, widely configured for newly-built petrochemical, thermal power and environmental protection DCS projects as well as spare replacement during old automation system reconstruction and regular module overhaul maintenance.
4. Core Performance Parameters
Electrical Specifications
Internal conductor of signal cable applies 22AWG tinned stranded copper wire with cross-linked polyethylene insulation layer; full cable is wrapped with aluminum foil inner shielding plus dense braided tinned copper outer double shielding structure to suppress external electromagnetic disturbance, satisfying stable transmission requirement of mixed analog, discrete and HART composite communication signals. Normal-temperature insulation resistance of finished cordset exceeds 100MΩ, successfully passes AC500V one-minute dielectric withstand test without insulation breakdown or surface creepage. Optimized internal wire arrangement minimizes signal transmission delay to avoid process collection data distortion and intermittent HART communication failure.
Environmental & Mechanical Specifications
Certified continuous rated working ambient temperature ranges from 0℃ to +60℃; long-term safe storage temperature covers -40℃ to +85℃, storage environment requires protection against corrosive volatile gas and direct high-temperature thermal radiation. The product complies with ISA-S71.04 Grade G2 industrial environmental criterion with outstanding resistance against cabinet floating dust and thin oil mist erosion. Mechanical locking plug structure is validated against long-time cabinet vibration impact, rated plugging and unplugging service life exceeds 1000 cycles to meet repeated disassembly demand of periodic equipment maintenance.
Reliability Index
Gold-plated contact terminals and full double shielding layout effectively reduce long-running contact impedance and slow signal drift, factory rated average service life reaches more than 85000 working hours under standard nominal industrial cabinet operating conditions.
5. Certification and Matching Accessories
P0700DL termination cable obtains CE conformity certification and UL wire safety certification to comply with international industrial electrical component norms. Original optional matching accessories include FBM module fixing buckles, nylon cable binding ties, wiring identification tags and cable strain relief fixing clips; all auxiliary spare parts carry independent Foxboro part numbers available for separate purchase during cabinet assembly and after-sales maintenance replacement.
6. Applicable Equipment and Application Fields
Compatible Matching Equipment
This wiring harness is specially compatible with Foxboro I/A Series FBM03, FBM08 and FBM41 hybrid analog-discrete input/output modules, working cooperatively with full-range P0700 series control processors installed on standard system backplane to complete closed-loop field signal collection, HART digital data reading and control signal forwarding of entire DCS control node.
Industrial Application Fields
Mainly applied for internal cabinet wiring of petrochemical auxiliary workshop control cabinets, municipal sewage and tap water treatment DCS automation cabinets, thermal power plant desulfurization and auxiliary water supply control cabinets, fine chemical and food processing production line control rooms, undertaking signal connection between on-site pressure, temperature, flow transmitters, site contact switches and matched FBM series I/O modules.
Get a Quote