1. General Information
1.1 Product Overview
MDX61B0011-5A3-4-0T is a high-performance four-quadrant servo drive from SEW-EURODRIVE MOVIDRIVE® MDX61B series. It supports synchronous and asynchronous motor control, and is widely applied in industrial automation, packaging machinery, robotic systems and machine tools. Equipped with integrated IPOSplus® positioning function and advanced technology features, it delivers high dynamic performance and precise motion control.
1.2 Model Code Explanation
MDX61B: MOVIDRIVE® servo drive with IPOSplus® positioning system
0011: Rated power 1.1 kW
5A3: 3-phase 380–500 VAC input, built-in Class C2 EMC filter
4: Four-quadrant operation with integrated brake chopper
0T: Technology version with conformal coated printed circuit board
1.3 Safety Instructions
All installation, wiring and maintenance work must be carried out by qualified electricians. Disconnect the main power supply before any operation and wait at least 5 minutes for the DC bus capacitors to fully discharge. The unit contains high voltage components and poses electric shock risks. It is designed for cabinet installation with IP20 protection. Do not operate beyond the rated specifications.
2. Technical Specifications
2.1 Electrical Parameters
Rated power: 1.1 kW
Input: 3 × 380–500 VAC, 50/60 Hz
Rated input current: 2.8 A
Output voltage range: 0–500 VAC
Output frequency range: 0–600 Hz
Continuous output current: 3.1 A
Overload capability: 150% rated current for 60 seconds, 200% rated current for 5 seconds
Control modes: Vector control, V/f control, servo control
Supported feedback: Resolver, external encoder via optional modules
Standard communication: RS485 interface, expandable to multiple fieldbus systems
Built-in protection: Overcurrent, overvoltage, undervoltage, overtemperature and short-circuit protection
2.2 Mechanical and Environmental Data
Protection class: IP20
Dimensions (W × H × D): Approximately 60 × 215 × 195 mm
Weight: Approximately 3.1 kg
Cooling method: Natural convection
Operating ambient temperature: 0 °C to +40 °C
Storage temperature: -25 °C to +55 °C
3. Installation
3.1 Mechanical Mounting
Mount the drive vertically on a flat and rigid mounting plate. Keep a clearance of no less than 100 mm at the top and bottom for heat dissipation. Fasten the unit with standard screws and avoid installation in areas with severe vibration.
3.2 Electrical Connection
Use shielded cables for power lines, motor cables and signal cables to meet EMC requirements. Connect 3-phase main power to L1, L2 and L3 terminals, and connect the motor to U, V and W terminals. Link the resolver signal and motor PTC thermistor to corresponding ports. Ensure reliable grounding for both the drive and the motor. Double-check all wiring before powering on.
4. Operation
4.1 Commissioning
Complete parameter setting and motor auto-tuning via MOVITOOLS® software. Run the drive under no load for a period of time, and check for abnormal noise, vibration or temperature rise. Verify the feedback signal and thermal protection function before formal operation.
4.2 Main Functions
IPOSplus® provides integrated positioning, sequence control, electronic cam and synchronous control functions. Four-quadrant operation realizes regenerative braking and energy recovery. The coated PCB enhances resistance against moisture and dust for stable operation in harsh environments.
5. Maintenance
The drive is basically maintenance-free under normal working conditions. Inspect terminal connections and cable tightness every six months. Clean dust on ventilation openings with dry compressed air. Check the cooling condition regularly to prevent heat accumulation.
6. Troubleshooting
Fault F01 Overcurrent: Caused by circuit short, motor failure or wrong wiring.
Fault F02 Overvoltage: Resulted from regenerative overload or brake chopper malfunction.
Fault F08 Overtemperature: Caused by overload or blocked ventilation.
Fault F25 Encoder error: Check resolver wiring and connection status.
7. Top Offer
TOP OFFER – MDX61B0011-5A3-4-0TOriginal SEW-EURODRIVE MOVIDRIVE servo drive, 1.1 kW, 380–500 VAC, four-quadrant design, equipped with IPOSplus® function and coated PCB. Brand new product with 12-month warranty and immediate delivery. Limited stock available.
8. Disclaimer
All technical specifications are subject to change without prior notice. The manufacturer shall not be responsible for equipment damage caused by improper installation, overload operation or unauthorized modification.
Get a Quote