MM05D‑503 (SEW MOVIMOT D‑Series, Latest Generation)
Description
1. Product Overview
2. Model Code Definition
MM: MOVIMOT decentralized drive system
05: Rated power 0.55 kW
D: D‑series (latest, Ethernet‑ready)
503: 3‑phase 380–500 V AC
‑00: Standard version
Part number: 18215009
3. Technical Specifications
3.1 Electrical Parameters
Input Voltage: 3×380–500 V AC (±10%), 50/60 Hz
Rated Input Current: 1.6 A
Rated Output Power: 0.55 kW (0.75 HP)
Rated Output Current: 2.0 A
Output Frequency: 2–120 Hz (extended range vs. C‑series)
Control Modes: U/f, VFC (vector), optional sensorless vector
Digital I/O: 4 programmable inputs / 2 programmable outputs
Communication: RS‑485 (standard), Ethernet (PROFINET, EtherNet/IP, optional)
Brake Control: Integrated (for SEW brake motors)
Overload: 150% for 60 s
EMC: Integrated EMC filter (meets IEC 61800‑3 Class C)
3.2 Mechanical & Environmental
Protection Class: IP55
Cooling: Natural convection (improved heat sink)
Dimensions (W×H×D): Approx. 130 × 175 × 95 mm
Weight: 1.4 kg (lighter than C‑series)
Operating Temperature: ‑30 °C to +40 °C (wider range)
Storage Temperature: ‑30 °C to +70 °C
4. Key Features
Latest‑gen platform: DSP‑based, faster response, lower noise.
Ethernet connectivity: Optional PROFINET/EtherNet/IP for Industry 4.0 integration.
Extended frequency: Up to 120 Hz for high‑speed applications.
Enhanced safety: STO (Safe Torque Off) as standard.
Compact & lightweight: Direct motor mounting, saves cabinet space.
Easy commissioning: DIP switches for basic setup; free SEW software for advanced parameters.
5. Comparison with MM05A/MM05B/MM05C/MM05D
| Model | Power | Output Current | EMC Filter | Ethernet | Status |
|---|---|---|---|---|---|
| MM05A | 0.55 kW | 2.0 A | ❌ | ❌ | Obsolete |
| MM05B | 0.55 kW | 2.5 A | ❌ | ❌ | Discontinued |
| MM05C | 0.55 kW | 2.0 A | ✅ | ❌ | Discontinued |
| MM05D | 0.55 kW | 2.0 A | ✅ | ✅ (opt.) | Current |
6. Typical Applications
Logistics conveyors, automated guided vehicles (AGVs)
Packaging machinery, material handling
Food & beverage, pharmaceutical (IP55, wide temp range)
General automation: fans, pumps, small machine tools
7. Installation & Wiring
7.1 Mechanical
Mount directly on SEW DRS/DRE/DRP motor flange.
Tighten screws to 3.0 Nm.
Ensure unobstructed airflow; avoid direct heat sources.
7.2 Electrical
Power (L1/L2/L3/PE): 3‑phase 380–500 V AC, reliable earth.
Motor (U/V/W/PE): Shielded cable to motor terminals.
Control: 24 V DC, run/stop, direction, enable signals.
Communication: RS‑485 (standard); Ethernet (optional module).
8. Commissioning
Verify wiring and insulation before power‑on.
Set motor parameters, control mode, and address via DIP switches.
Power on; steady green LED = standby.
Test run at low speed; check for noise/vibration, then ramp to operating speed.
9. Status & Faults
9.1 LED Indications
Steady green: Ready
Flashing green: Running
Flashing red: Fault (overcurrent, overvoltage, overtemperature, comms error)
9.2 Common Faults
Overcurrent: Short circuit, overload, motor winding fault.
Overvoltage: Input surge, regenerative voltage from motor.
Overtemperature: Poor ventilation, ambient temp >40 °C.
Comms error: Faulty cable, incorrect address, module mismatch.
10. Maintenance
Clean heat sink and dust every 6 months.
Check terminal tightness and cable insulation regularly.
Replace damaged seals/cables; ensure IP55 integrity.
11. Storage & Disposal
Store in dry, clean area at ‑30 °C to +70 °C.
Dispose per local WEEE regulations; recycle metals, plastics, electronics.
Get a Quote