1. Product Overview

2. Model Code Meaning

• MM: MOVIMOT decentralized drive

• 05: Rated motor power 0.55 kW

• A: A‑series (original, basic version)

• 503: 3‑phase 380–500 V AC supply

• ‑00: Standard version (full model: MM05A‑503‑00)

3. Key Technical Data

3.1 Electrical

• Input: 3×380–500 V AC (±10%), 50/60 Hz

• Rated output power: 0.55 kW

• Rated output current: 2.0 A

• Output frequency: 2–100 Hz

• Control: U/f (basic) / vector (VFC) optional

• I/O: 4 digital inputs / 2 digital outputs (fixed mapping on A‑series)

• Communication: RS‑485 (optional, not standard)

• Safety: No STO (Safe Torque Off) option

• Brake: Basic brake control (for SEW brake motors)

• Overload: 150% for 60 s

3.2 Mechanical & Environmental

• Protection class: IP55

• Cooling: Natural convection

• Dimensions (W×H×D): ~120 × 180 × 80 mm

• Weight: ~2.6 kg

• Operating temperature: ‑25 °C to +40 °C

• Storage temperature: ‑25 °C to +70 °C

4. Main Features (A‑series vs C/D)

1. Basic control: Primarily U/f; limited vector tuning.

2. Fixed I/O mapping: Less flexible than C/D series.

3. No integrated EMC filter: Requires external filter.

4. No STO safety: Lower safety level than later models.

5. Simple commissioning: DIP switches only (no potentiometers).

5. Typical Applications

• Older conveyor systems

• Basic packaging machinery

• Material handling (low complexity)

• General automation with simple speed control

6. Installation & Wiring

6.1 Mechanical

• Mount directly on SEW motor flange (torque 3.0 Nm).

• Keep ventilation clear; avoid heat sources.

6.2 Electrical

• Power: L1/L2/L3/PE → 380–500 V AC

• Motor: U/V/W/PE → shielded cable

• Control (X6): 24 V DC, direction, enable, fault

7. Commissioning (Simplified)

1. Check wiring and insulation.

2. Set DIP switches (address, brake mode, U/f curve).

3. Power on; green LED = ready.

4. Test run at low speed, then ramp up.

8. Status & Faults (2‑color LED)

• Green steady: Ready

• Green flash: Running

• Red flash: Fault (overcurrent, overvoltage, overtemperature)

9. Maintenance & Replacement

• Clean heat sink every 6 months.

• Check terminal torque (0.8–1.5 Nm).

• Upgrade note: MM05A is obsolete; direct replacement is MM05C‑503 or MM05D‑503 (better performance, safety, and features).