1. General Description

• Model: MDX61B0150-503-4-00

• Manufacturer: SEW‑EURODRIVE

• Series: MOVIDRIVE® MDX61B (Size 3)

• Rated Power: 15 kW (Constant Torque, CT)

• Type: Standard industrial drive, no integrated EMC filter, non‑conformal coated PCB, for clean indoor environments.

2. Model Code Explanation

• MDX61B: MOVIDRIVE B series, dual expansion slots (encoder + fieldbus)

• 0150: Rated power 15 kW

• 503: 3‑phase 380–500 V AC, without built‑in EMC filterSEW-EURODRIVE

• 4: Internal brake chopper, four‑quadrant regenerative operation

• 00: Standard version, non‑coated PCB, clean/dry environments

3. Technical Specifications

3.1 Electrical Ratings

• Input Voltage: 3×380–500 V AC (‑15% / +10%), 50/60 HzSEW-EURODRIVE

• Rated Input Current: 28.8 A

• Rated Output Power: 15 kW (CT)

• Rated Output Current: 32 A

• Apparent Power: 22.2 kVA

• Output Frequency: 0–599 Hz

• Control Modes: VFC (V/f), CFC (closed‑loop vector), Servo control

• Overload: 150% / 60 s; 200% / 1 s

• Switching Frequency: 4/8/12/16 kHz (adjustable)

• Safety: STO (Safe Torque Off), PL d / SIL 2

3.2 Mechanical & Environmental

• Protection Class: IP20 (cabinet mount only)

• Dimensions (W×H×D): 200 × 465 × 308 mm

• Weight: ~15 kg

• Operating Temp: 0 °C to +45 °C (derate above 40 °C)

• Storage Temp: ‑25 °C to +70 °C

• PCB Protection: Non‑coated (standard 00)

• Altitude: ≤1000 m no derating; 1% / 100 m above 1000 m

• Certifications: CE, UL, RoHS, EAC

4. Main Features

1. No Internal EMC Filter (503): For systems with external EMC filters (C1/C2)SEW-EURODRIVE.

2. Four‑Quadrant Operation: Built‑in brake chopper for regenerative braking.

3. IPOSplus® Motion: Positioning, electronic gearing, master‑slave sync; application modules (winding, flying saw).

4. Modular Design: Expandable via encoder (DEU21B) and fieldbus modules (PROFINET, EtherCAT).

5. Standard PCB: Non‑coated, cost‑effective for clean industrial areas.

5. Installation & Wiring

• Mounting: Vertical in control cabinet.

• Clearance: ≥100 mm top/bottom, ≥50 mm sides.

• Main Terminals:

  • X1: L1, L2, L3, PE (mains)

  • X2: U, V, W, PE (motor)

  • X4: +UZ, –UZ, PE (DC link, external brake resistor)

  • X11: Analog input (0–10 V / 4–20 mA)

  • X13: 24 V DC digital I/O

  • X15/X16: Encoder interfaces

6. Operation & Commissioning

• Local: DBG60B keypad (parameters, run/stop, fault display).

• PC: MOVITOOLS® MotionStudio (programming, monitoring, diagnostics).

• Modes: Jog, reference homing, positioning, synchronous operation.

7. Safety Notes

• Install/wire only by qualified electricians.

• High voltage remains ≥5 min after power‑off; wait for discharge before servicing.

• Use shielded cables for motor/signal wiring; add external EMC filter per 503 designSEW-EURODRIVE.

8. Maintenance & Troubleshooting

• Routine: Check connections/ventilation; clean dust with dry compressed air.

• Common Faults: OC (overcurrent), OV (overvoltage), OT (overtemp), encoder error.

9. Applications

• Conveyors, cranes, hoists

• Packaging, textile, woodworking machinery

• Fans, pumps, process equipment

• Clean environments: Indoor industrial sites with external EMC planningSEW-EURODRIVE.

10. Version Comparison (15 kW Models)

• 00: Non‑coated PCB, no internal filter → clean environments + external EMCSEW-EURODRIVE

• 0T: Conformal coated PCB, no internal filter → humid/dusty environments

• 5A3: Non‑coated PCB, integrated C2 filter → clean environments, no external filter needed