1. General Description

2. Model Code Explanation

• MDX61B: MOVIDRIVE B series, dual expansion slots for encoder and fieldbus modules

• 0110: Rated power 11 kW (constant torque)

• 5A3: 3-phase 380–500 V AC power supply, integrated Class C2 EMC filter

• 4: Integrated brake chopper, supports four-quadrant regenerative operation

• 00: Standard version with non-conformal coated PCB, for clean indoor conditions

3. Technical Specifications

3.1 Electrical Ratings

• Input voltage: 3×380–500 V AC (-15% ~ +10%), 50/60 Hz

• Rated input current: 21.6 A

• Rated output power: 11 kW (CT)

• Rated output current: 24 A

• Apparent power: 16.8 kVA

• Output frequency range: 0–599 Hz

• Control modes: VFC (V/f), CFC (closed-loop vector), Servo control

• Overload capability: 150% rated current for 60 s; 200% rated current for 1 s

• Switching frequency: 4 / 8 / 12 / 16 kHz (adjustable)

• Safety function: STO (Safe Torque Off), certified to PL d / SIL 2

3.2 Mechanical & Environmental

• Protection class: IP20 (cabinet mounting only)

• Dimensions (W × H × D): 135 × 315 × 285 mm

• Weight: Approx. 6.6 kg

• Operating temperature: 0 °C to +45 °C

• Storage temperature: -25 °C to +70 °C

• Altitude: No derating below 1000 m; derate 1% per additional 100 m above 1000 m

• PCB treatment: Standard non-coated

• Certifications: CE, UL, RoHS, EAC

4. Main Features

1. Built-in Class C2 EMC filter, fully compliant with industrial EMC requirements.

2. Internal brake chopper enables four-quadrant operation and regenerative braking.

3. Integrated IPOSplus® motion system for positioning, electronic gearing and master-slave synchronization.

4. Modular design, expandable with optional encoder and fieldbus modules.

5. Reliable STO safety function for machine safety protection.

6. Cost-effective standard model for common industrial applications.

5. Installation & Wiring

• Mounting: Vertical installation inside control cabinet.

• Ventilation clearance: Minimum 100 mm at top and bottom, 50 mm on both sides.

• Main terminals:

  • X1: Mains connection (L1, L2, L3, PE)

  • X2: Motor connection (U, V, W, PE)

  • X4: DC link terminals for external brake resistor

  • X11: Analog input (0–10 V / 4–20 mA)

  • X13: 24 V DC digital inputs and outputs

  • X15 / X16: Encoder interfaces

6. Operation & Commissioning

• Local control: DBG60B handheld keypad for parameter setting, operation and fault checking.

• PC commissioning: MOVITOOLS® MotionStudio for programming, monitoring and diagnostics.

• Operating modes: Jog mode, reference homing, positioning mode, synchronous operation.

7. Safety Notes

• Installation and commissioning must be performed by qualified electrical personnel.

• High voltage remains in DC bus after power cut-off. Wait at least 5 minutes for full discharge before touching internal terminals.

• Use shielded cables for motor and signal wiring to maintain EMC performance.

8. Maintenance & Troubleshooting

• Routine maintenance: Regularly check wiring and ventilation; remove dust with dry compressed air.

• Typical faults: Overcurrent (OC), overvoltage (OV), overtemperature (OT), encoder error. Fault codes can be displayed on keypad or software.

9. Application Scope

• Conveyors, cranes and hoists

• Packaging, textile and woodworking machinery

• Fans, pumps and process equipment

• General automation systems requiring precise speed and position control

10. Version Comparison

• 00: Non-coated PCB, with integrated C2 EMC filter → Clean & dry environments

• 0T: Conformal coated PCB, with integrated C2 EMC filter → Humid, dusty or mildly corrosive environments

• 50: No built-in EMC filter, special OEM version → Systems with external EMC configuration