1. General Information

2. Model Decoding

• MDX61B: B series, dual expansion slots (encoder + fieldbus)

• 0075: 7.5 kW rated power

• 5A3: 3‑phase 380–500 V AC, integrated Class C2 EMC filter

• 4: 4‑quadrant operation, integrated brake chopper

• 0T: Application version (technology functions, full motion control)

3. Technical Specifications

3.1 Electrical Data

• Input Voltage: 3×380–500 V AC (‑15% / +10%), 50/60 Hzeero

• Rated Input Current: 14.4 Aeero

• Output Power: 7.5 kW (constant torque)

• Rated Output Current: 16 Aeero

• Apparent Power: 11.2 kVAeero

• Output Frequency: 0–599 Hzeero

• Control Modes: VFC (V/f), CFC (closed‑loop vector), servo controleero

• Overload Capacity: 150% IN for 60 s; 200% IN for 1 seero

• Switching Frequency: 4/8/12/16 kHz (adjustable)eero

• Safety: STO (Safe Torque Off) up to PL d / SIL 2eero

3.2 Mechanical & Environmental

• Protection Class: IP20 (cabinet installation)eero

• Dimensions (W×H×D): 105 × 335 × 294 mm (size 2S)eero

• Weight: Approx. 6.6 kgeero

• Ambient Temperature: 0 °C to +45 °Ceero

• Storage Temperature: ‑25 °C to +70 °Ceero

• Certifications: CE, UL, RoHS, EACeero

4. Key Features

• Application‑Ready (0T Version): Electronic cam, internal synchronous operation, flying saw, winding control, and all MOVITOOLS® application modules

• Modular Expansion: Dual slots for encoder (e.g., DEH11B) and fieldbus (PROFIBUS, EtherCAT, PROFINET) moduleseero

• Integrated EMC: Class C2 filter for industrial EMC complianceeero

• 4‑Quadrant Operation: Internal brake chopper for regenerative braking and energy recoveryeero

• IPOSplus®: Integrated positioning, electronic gearing, and synchronizationeero

• Conformal Coating: Standard for harsh/dusty environments (PCB protected)eero

5. Installation & Wiring

5.1 Installation

• Mounting: Vertical, cabinet installation (IP20)eero

• Clearance: Min. 100 mm top/bottom, 50 mm sides for ventilationeero

5.2 Terminal Assignment (Basic Unit)

• X1 (Mains): L1, L2, L3, PEeero

• X2 (Motor): U, V, W, PEeero

• X4 (DC Link): +UZ, –UZ, PE (for brake resistor/DC bus coupling)eero

• X11 (Analog In): 0–10 V / 4–20 mAeero

• X13 (Binary In/Out): 24 V digital I/Oeero

• X15/X16 (Encoder): For incremental/absolute encoderseero

6. Operation & Control

6.1 Operating Modes

• Jog Mode: Manual movement for setup

• Reference Travel: Automatic zero reference for incremental systems

• Positioning Mode: IPOSplus® positioning with electronic gearing

• Synchronous Operation: Master‑slave synchronization (encoder or SBus)

6.2 Keypad & Software

• DBG60B Keypad: Local control, parameter setting, fault diagnosiseero

• MOVITOOLS®: PC software for commissioning, monitoring, and application programming

7. Safety Instructions

• Qualified Personnel: Only trained electrical staff may install/commission the uniteero

• High Voltage: Wait 5 minutes after power‑off before touching terminals (DC link discharge)eero

• STO Safety: STO input disables torque output (PL d / SIL 2)eero

• EMC Compliance: Use shielded cables and follow EMC installation guidelineseero

8. Fault Diagnosis & Maintenance

8.1 Fault Codes

• Displayed on 7‑segment LED or via keypad/MOVITOOLS®eero

• Common faults: Overcurrent (OC), overvoltage (OV), overtemperature (OT), encoder error (En)eero

8.2 Maintenance

• Regular inspection: Check cables, connections, and ventilation filterseero

• Cleaning: Keep unit free of dust; use dry compressed air (max. 5 bar)eero

9. Typical Applications

• Conveying systems, cranes, hoistseero

• Packaging, textile, woodworking machineryeero

• Flying saw, winding, and synchronized production lines

• Pumps, fans, and process equipment requiring precise motion controleero

10. Ordering Information

• Model: MDX61B0075-5A3-4-0T

• Accessories: DBG60B keypad, DEH11B encoder module, brake resistor BW072-005, fieldbus modules (PROFIBUS, EtherCAT)eero