1. Model Code Explanation

• MDX60A: MOVIDRIVE MDX60A series AC drive

• 1320: Rated output power 132 kW

• 5: 3-phase input voltage 380 V to 500 V AC

• 03: Version without built-in EMC/RFI filter

• 4: Integrated brake chopper, supporting 4-quadrant operation

• 00: Standard hardware configuration

2. Electrical Specifications

Input

• Voltage range: 3×380 V (-10%) ~ 3×500 V (+10%)SEW-EURODRIVE

• Frequency: 50/60 Hz ±5%SEW-EURODRIVE

• Rated input current (400 V): 248 A

Output

• Rated power: 132 kW

• Apparent power: 182 kVA

• Rated output current: 210 A (4 kHz PWM)

• Output voltage: 0 to rated input voltageSEW-EURODRIVE

• Output frequency: 0–180 Hz (VFC), 0–500 Hz (vector)SEW-EURODRIVE

• Overload capacity: 125% for 60 s, 150% for 3 s

• PWM frequency: 4 kHz (default), 8 kHz/16 kHz adjustable

• Brake chopper: Integrated, for regenerative loadseero

3. Control Functions & Performance

• Control modes: VFC (sensorless V/F), CFC (encoder vector)SEW-EURODRIVE

• Speed range: -6000 to +6000 rpm; resolution 0.2 rpm

• Built-in functions: Auto-tuning, flying restart, energy saving, DC brakingeero

• Performance: High dynamic response, precise speed regulation

4. I/O & Communication

• Analog input: 0–10 V / -10 V~+10 V (speed reference)

• Digital I/O: 8×24 V DC inputs, 6×relay outputs (programmable)eero

• Motor thermistor input (PTC/TF/TH/KTY)eero

• Standard: SBus system bus

• Optional: Profibus DP, CANopen, Modbus RTU

5. Mechanical & Environmental

• Protection class: IP20 (cabinet installation)eero

• Cooling: Forced air, temperature-controlled faneero

• Operating temp: 0 °C to +40 °C; derate 2%/°C above 40 °Ceero

• Storage temp: -25 °C to +70 °C

• Weight: approx. 85 kg

• Dimensions: approx. 450 × 350 × 650 mm

6. Protection Functions

• Overcurrent, overvoltage, undervoltage, overtemperatureeero

• Ground fault, short circuit, motor overheat, fast current limiteero

• Alarm & safe stop on fault

7. Application Scope

• Heavy-duty conveyors, cranes, mills, extruders, large pumps/fans

• Frequent deceleration & regenerative loads; external EMC filter requiredSEW-EURODRIVE

8. Certifications & Standards

• CE, UL 508C, CSA, RoHS complianteero

• Meets EN 61800-3, EN 60204-1eero

9. Model Distinction

• 503: No built-in RFI filter (external required)SEW-EURODRIVE

• 5A3: With built-in RFI filter (simpler installation)SEW-EURODRIVE