1. General Information

• Part Number: DC162/IP20/53151 (also DC 162/IP20/53151/02 /04)

• Manufacturer: KEBA Industrial Automation

• Type: PLC breakout / I/O interface board (KePlast / injection molding / machine control)

• Protection: IP20 (cabinet mounting)

• Weight: ~0.6 kg

• Form: DIN-rail / chassis mount, with screw terminal blocks

2. Electrical Ratings

• Supply Voltage: 24 VDC ±10% (19.2–30 VDC)

• Current Consumption: ≤1.2 A

• Protection: Overvoltage, overcurrent, short‑circuit, reverse polarity, EMC filtering

3. I/O Configuration (DC162)

• Digital Inputs: 16 × 24 VDC (sink/source)

• Digital Outputs: 8 × 24 VDC / 0.5 A (transistor)

• Analog Inputs: 4 × (0–10 V / 4–20 mA), 12‑bit

• Analog Outputs: 2 × 0–10 V, 12‑bit

• Encoder: 1 × incremental (A/B/Z, 5 V)

4. Communication & Interfaces

• K‑Bus: KEBA backplane bus (to CU312/CU313 CPU)

• RS‑232: 1 × DB9 (service/debug)

• Status LEDs: PWR, RUN, ERR, channel status

5. Environmental

• Operating Temp: 0 °C to +55 °C

• Storage Temp: −40 °C to +85 °C

• Humidity: 5%–95% RH, non‑condensing

6. Mechanical

• Dimensions (H×W×D): approx. 160 × 100 × 35 mm

• Mounting: DIN‑rail or direct chassis mounting

• Terminals: Screw terminals for field wiring

7. Features

• Industrial I/O breakout for KEBA control systems

• Isolated digital I/O for noise immunity

• Precision analog front‑end for sensors/transducers

• Real‑time motion/process control synchronization

• Compatible with KePlast, KeMotion, KeControl platforms

8. Installation

1. Disconnect power before installation/removal.

2. Mount on DIN‑rail or chassis; secure firmly.

3. Use shielded cables for analog/encoder signals.

4. Keep cabinet well ventilated; avoid direct heat.

5. Tighten all terminals; inspect contacts periodically.

9. Safety

• For qualified personnel only (installation, config, service).

• Operate only within rated voltage/temperature range.

• Do not modify the board; voids warranty.

• Disconnect power before wiring or maintenance.