XYCOM 70113-001 Industrial VME Bus Module - Detailed Product Description
XYCOM 70113-001 Industrial VME Bus Module - Detailed Product Description
I. Product Overview
XYCOM 70113-001 is an industrial-grade VME bus-specific module under the XVME series of XYCOM. It is a core board component of XYCOM's automation control product line, designed specifically for industrial automation, embedded control systems, data acquisition and monitoring scenarios. It is compatible with the standard 6U VME chassis architecture and can be directly inserted into the VME backplane for system expansion, data processing or signal conversion. It features wide temperature operation, resistance to strong electromagnetic interference, high stability and long lifespan, and supports 24-hour uninterrupted continuous operation. It is one of the mainstream choices for upgrading old VME systems and expanding industrial control equipment.
II. Product Naming and Positioning
70113-001: The official unique material code of XYCOM, used for precisely identifying the hardware version, specification configuration and batch of this module, and suitable for the original factory's traceability and replacement;
Series归属： XVME (Xycom VME bus) series， developed based on the VME industrial bus standard， compatible with VME32/VME64 architectures；
Core Positioning： Industrial VME bus interface / signal processing module， targeting industrial sites with strict requirements for data transmission reliability， environmental adaptability， and long-term operational stability， responsible for bus data interaction， signal conditioning， and peripheral expansion functions， compatible with XYCOM's full range of VME controllers and third-party standard VME devices.
III. Core Functional Characteristics
1. Standard VME bus compatibility， plug-and-play rapid integration
Adopting a 6U single-high VME standard architecture， compatible with VME32/VME64 bus protocols， supporting A16/A24/A32 address space addressing， data width supports 16/32-bit switching， with a maximum bus transmission rate of up to 40MB/s. The module uses standard VME 64-pin gold-plated connectors， with long insertion and removal life， stable contact， and oxidation resistance， which can be directly inserted into any standard 6U VME chassis backplane， without additional drivers or complex configuration. Power-on automatically completes bus identification， resource mapping， and communication initialization， significantly reducing system integration and upgrade difficulty， compatible with XYCOM XVME series full range of boards and mainstream third-party VME devices.
2. Industrial-grade signal processing and data interaction， stable and reliable
Integrating dedicated bus control chips and signal conditioning circuits， with functions of signal amplification， filtering， and level conversion， capable of effectively adapting to the complex signal environment in industrial sites， ensuring the integrity and accuracy of data transmission. Supports VME bus interrupt response and DMA data transmission， capable of achieving high-speed， efficient data reception and transmission， compatible with industrial control scenarios with high real-time requirements. The board is equipped with multiple data verification mechanisms (parity check， CRC check)， capable of automatically detecting and correcting transmission errors， avoiding data disorder and loss， suitable for key business scenarios such as industrial production and data collection.
3. Wide temperature resistance to harsh environments， compatible with strict conditions
Using industrial-grade wide-temperature components， with a working temperature range of **-10℃ to +60℃， storage temperature range of -40℃ to +85℃， capable of withstanding drastic temperature fluctuations， humidity， dust， oil contamination， etc. The motherboard adopts multi-layer PCB shielding design， surface coated with moisture-proof， anti-corrosion， and anti-salt fog coatings， with dust-proof， anti-corrosion， and anti-aging capabilities. Built-in power filter， surge suppression， electromagnetic shielding circuits， can effectively isolate electromagnetic interference (EMI/RFI) generated by frequency converters， motors， high-voltage equipment， avoiding module freezing， communication interruption or data anomalies. CE and UL industrial certifications， vibration and shock resistance design， able to withstand continuous vibration in industrial sites， average failure-free time (MTBF) over 80，000 hours.
4. Solid mechanical structure design， stable long-term operation
Using high-strength metal front panel + flame-retardant PCB board structure， 6U standard single-high size (160mm×233.35mm)， compatible with various standard VME installation positions， supporting vertical and horizontal installation methods， firmly installed， sufficient heat dissipation space. Edge connectors of the board use gold-plated technology， resistant to oxidation and corrosion， long-term use without contact problems. The front panel is reserved for status indicator light areas, integrating four high-brightness LED indicators for power, operation, fault, and communication. These indicators display the module's working status in real time, allowing for quick determination of normal operation without the need for specialized tools. This simplifies the on-site operation and maintenance process.
5. Low power consumption and efficient power supply, safe and stable
Using VME bus + 5V DC power supply, with low power consumption and small heat generation, typical power consumption ≤ 5W. No additional heat dissipation module is required. It is suitable for enclosed VME chassis environments. The power input integrates overcurrent, overvoltage, and reverse connection protection circuits, capable of withstanding voltage fluctuations, wiring errors, and power surges, protecting the internal circuit safety of the module and avoiding hardware damage caused by abnormal power supply. It is suitable for complex and unstable power supply environments in industrial sites.
Four. Overall hardware specifications
Bus and interface
Bus standard: VME32/VME64 compatible;
Address space: A16/A24/A32 selectable;
Data width: 16/32 bits;
Transmission rate: Up to 40MB/s;
Connector: Standard VME 64-pin gold-plated connector.
Electrical characteristics
Power supply method: VME bus + 5V ± 5%;
Typical power consumption: ≤ 5W;
Protection mechanism: Overcurrent, overvoltage, reverse connection protection, surge suppression.
Environmental parameters
Operating temperature: -10℃ to +60℃;
Storage temperature: -40℃ to +85℃;
Humidity: 5% to 95% (no condensation);
Anti-vibration: 5g (10 to 1000Hz);
Anti-shock: 10g (11ms half sine wave);
Protection grade: Board moisture-proof and anti-corrosion coating, dust-proof and salt fog-proof.
Mechanical specifications
Size: 6U single-height (160mm × 233.35mm);
Panel: High-strength metal material;
PCB: Flame-retardant industrial-grade board, moisture-proof and anti-corrosion coating;
Weight: Approximately 0.7kg;
Installation: Standard VME chassis slot, supports vertical/horizontal installation.
Status indication
Power (PWR): Always on indicates normal power supply;
Operation (RUN): Flashes indicate normal module operation;
Communication (COM): Flashes indicate bus data transmission;
Fault (FAULT): Always on indicates module abnormality or communication error.
Five. Main application scenarios
Industrial automation control system
Used in VME bus architecture PLC and DCS control systems in industries such as metallurgy, chemical engineering, power, and water treatment, as a bus expansion module to realize data interaction between controllers and I/O modules, sensors, and actuators, ensuring stable transmission of control instructions and on-site data, suitable for continuous production and high-reliability requirements in industrial scenarios.
Embedded data acquisition and monitoring equipment
As the core bus module of the data acquisition system, it connects various data acquisition cards, sensor modules, and realizes the acquisition, processing, and upload of on-site analog and digital signals, suitable for industrial monitoring terminals, remote data acquisition stations, intelligent instruments, etc., ensuring the real-time and accuracy of data acquisition.
Upgrade and expansion of old VME systems
Replace old, faulty, or insufficient-performance VME bus modules, compatible with the original chassis, backplane, and system architecture, no need for redeveloping hardware or modifying the system, simply plug and replace, quickly restore system functions, improve bus performance, reduce upgrading costs and downtime, suitable for modernization transformation of various old industrial control equipment.
Special industrial and military equipment
Suitable for military, aerospace, rail transportation, ships, etc. special industrial scenarios, with wide temperature range, anti-vibration, high reliability design, able to withstand extreme environmental conditions, ensuring stable transmission of critical control data and signals, guaranteeing long-term, safe, and reliable operation of special equipment.
Six. Fault diagnosis and daily maintenance
Daily maintenance After regular power outages, use a dry soft cloth to wipe the surface of the module and connectors, removing dust and oil stains. Do not use liquid cleaners to prevent water from seeping into the board card; regularly inspect the VME chassis slots and connectors, cleaning the oxide layer and impurities to ensure good contact; avoid keeping the module in a high-temperature, high-humidity, strong vibration, and strong electromagnetic interference environment for a long time to extend its service life; check the capacitors, connectors, and other easily aging components of the board card once every 1-2 years and replace the aged components in time. Common faults
PWR indicator not lit: Check if the +5V power supply of the VME chassis is normal, if the slots are loose, and if the connectors are oxidized or have poor contact; Investigate the fault in the internal power circuit of the module.
RUN indicator not flashing: The module has not started normally. Check the bus configuration and address jumpers to ensure they are correct; Investigate the core chip and firmware faults of the board; Reinsert and test the module or replace the slot.
COM indicator not flashing: No bus data transmission. Check if the bus connection is normal and if the communication protocol configuration matches; Investigate bus conflicts, peripheral faults or abnormal module communication circuits.
FAULT indicator constantly lit: Hardware failure of the module, bus error or data verification failure; Check if the signal wiring is correct and if there is any short circuit / open circuit; Investigate damaged board components or abnormal firmware.
Data transmission abnormal / disorder: Caused by electromagnetic interference. Check if the system grounding is good and if the shielding measures are in place; Check for incorrect signal wiring or poor contact, recheck the wiring; Faults in the module's filtering or verification circuits, repair or replace the module.
VII. Core Product Advantages
XYCOM 70113-001 is an industrial-grade VME bus-specific module with standard VME architecture compatibility for plug-and-play, integrating dedicated signal processing circuits to ensure stable data transmission, wide temperature anti-interference design suitable for harsh working conditions, sturdy structure and low power consumption design for long-term stable operation, and simplified operation and maintenance through front panel indicator lights. As a core expansion component of the VME system, it perfectly fits industrial automation, data acquisition, and upgrading of old equipment scenarios, and is an ideal VME bus module selection for industrial sites with high requirements for data reliability and environmental adaptability.