ABB AF52-30-00-13 1SBL367001R1300: AF52 Three-Pole Contactor Product Description
November 17, 2026

ABB AF52-30-00-13 1SBL367001R1300: AF52 Three-Pole Contactor Product Description

The ABB AF52-30-00-13, ABB product ID 1SBL367001R1300 and EAN 3471523132337, is a three-pole block contactor from the ABB AF52 contactor series. The AF prefix identifies the AF wide-range electronic coil contactor family, 52 identifies the AF52 frame size, 30 identifies three main poles with no built-in auxiliary contacts, 00 identifies no auxiliary contact configuration on this base unit, and -13 identifies the control coil variant. The catalog description identifies the device as a 100 to 250 V, 50 or 60 Hz AC and DC operated contactor. The contactor controls three-phase motors, non-inductive loads and slightly inductive loads in low-voltage power circuits.

Description

ABB AF52-30-00-13 1SBL367001R1300: AF52 Three-Pole Contactor Product Description

Brand and Product Identification

The ABB AF52-30-00-13, ABB product ID 1SBL367001R1300 and EAN 3471523132337, is a three-pole block contactor from the ABB AF52 contactor series. The AF prefix identifies the AF wide-range electronic coil contactor family, 52 identifies the AF52 frame size, 30 identifies three main poles with no built-in auxiliary contacts, 00 identifies no auxiliary contact configuration on this base unit, and -13 identifies the control coil variant. The catalog description identifies the device as a 100 to 250 V, 50 or 60 Hz AC and DC operated contactor. The contactor controls three-phase motors, non-inductive loads and slightly inductive loads in low-voltage power circuits.

Product Function and System Role

The AF52-30-00-13 switches and isolates a three-phase power circuit when the electronic coil is energized by the control circuit. The main NO contacts close to connect the motor or load to the supply, and opening the coil circuit drops out the contacts to stop or isolate the load. The contactor is controlled by PLC outputs, pushbuttons, relays, motor protection devices or automation control signals. It is a power switching contactor, not a motor-protective circuit breaker, overload relay, soft starter, drive, PLC or disconnect switch by itself.

Main Circuit Ratings

The contactor has three main NO poles. Rated operational voltage for the main circuit is 690 V AC. AC-1 rated operational current at 690 V is 100 A at 40 degrees Celsius, 80 A at 60 degrees Celsius and 70 A at 70 degrees Celsius. AC-3 rated operational current is 53 A at 220, 230 or 240 V and at 380 or 400 V at 60 degrees Celsius. AC-3 rated operational power is 15 kW at 220 to 240 V, 22 kW at 380, 400 or 415 V, and 30 kW at 440 V. UL motor horsepower ratings include 3 hp at 120 V AC single phase, 10 hp at 240 V AC single phase, 15 hp at 200 to 208 V AC three phase, 20 hp at 220 to 240 V AC three phase, 40 hp at 440 to 480 V AC three phase and 50 hp at 550 to 600 V AC three phase.

Coil and Control Circuit

The AF contactor includes an electronic coil interface accepting a wide control voltage range. This AF52-30-00-13 variant operates with control voltage 100 to 250 V AC at 50 or 60 Hz and 100 to 250 V DC according to the catalog description. AF contactors are designed to manage large control voltage variations, and the coil can be used for different control voltages worldwide without changing the coil. Built-in surge protection eliminates the need for additional surge suppressors. The control circuit operates with AC or DC control supply.

Contacts and Accessories

The base contactor has three main poles and no built-in auxiliary contacts. Front or side-mounted add-on auxiliary contact blocks are available for auxiliary control or feedback signals. Auxiliary contact blocks use mechanically linked contacts compliant with Annex L of IEC 60947-5-1, and normally closed mirror contacts comply with Annex F of IEC 60947-4-1. The AF52 series block design supports a wide range of ABB contactor accessories for mounting, wiring and auxiliary contact expansion.

Construction and Connection

The AF52 is a one-stack three-pole block type contactor. Main circuit and control connections use screw terminals according to the ABB AF contactor design. The contactor mounts on DIN rail or panel within a motor starter assembly, typically combined with an overload relay or motor protection device for motor branches. The main circuit is rated for power circuits up to 690 V AC and 220 V DC according to the AF52 product description.

Standards and Compliance

The AF52-30-00-13 complies with IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60335-2-40, UL 60947-1, UL 60947-4-1 and CSA C22.2 standards listed on the ABB product record. These standards cover low-voltage contactors, motor contactors and household or general use equipment requirements. The contactor is suitable for IEC and UL applications where the corresponding ratings and horsepower data are used.

Typical Application Scenarios

Typical applications include three-phase motor starters, pumps, fans, compressors, conveyors, machine tools, packaging machines, material handling equipment, non-inductive resistive loads and slightly inductive industrial loads. The contactor is commonly used in motor control centers, control cabinets, machine panels, starter combinations with overload relays, and automation panels where remote or automatic switching of a three-phase load is required.

Installation and Wiring Notes

Installation should follow the ABB AF contactor product documentation, IEC or EN 60947-4-1 motor starter standards, UL or CSA requirements where applicable, and local electrical codes. Mount the contactor on DIN rail or panel, connect line and load main contacts to the three-phase supply and motor, connect the coil control circuit to the rated control voltage, and add auxiliary contact blocks if feedback or control interlocking is required. Verify contactor rating against motor current and horsepower, coordinate with the overload relay or motor protection device, and check terminal torque, wiring capacity and load type before energizing.

Advantages and Selection Notes

The AF52-30-00-13 offers three-pole main contacts, 100 A AC-1 current, 53 A AC-3 current, 22 kW at 400 V AC-3 rating, wide-range 100 to 250 V AC or DC electronic coil, built-in surge protection, add-on auxiliary contact capability, screw terminals and ABB AF series accessory compatibility. When selecting a replacement, confirm pole count, main contact configuration, AC-1 or AC-3 rating, voltage, kW or horsepower, coil control voltage, auxiliary contacts, terminal type and overload relay coordination. The AF52-30-00-13 is a power contactor, not a breaker, overload relay, soft starter, drive, PLC or sensor; its role is to switch and control three-phase motor and industrial loads under control circuit command.


Get a Quote