ABB 1MRK000005-262 1MRK000167-HDR00: Relion Protection Relay PC Board Product Description
November 17, 2026

ABB 1MRK000005-262 1MRK000167-HDR00: Relion Protection Relay PC Board Product Description

The ABB 1MRK000005-262 1MRK000167-HDR00 is an ABB internal printed circuit board assembly for ABB protection and control relays. The number 1MRK000167-HDR00 is the board or module type designation, while 1MRK000005-262 is the spare or index number associated with that board variant. Related 1MRK000167 series boards include GCR00, GBR00, GDR00 and other suffix revisions, each matched to a specific Relion IED, relay function and hardware index. The HDR00 suffix identifies this particular PCB revision and configuration.

Description

已思考

ABB 1MRK000005-262 1MRK000167-HDR00: Relion Protection Relay PC Board Product Description

Brand and Product Identification

The ABB 1MRK000005-262 1MRK000167-HDR00 is an ABB internal printed circuit board assembly for ABB protection and control relays. The number 1MRK000167-HDR00 is the board or module type designation, while 1MRK000005-262 is the spare or index number associated with that board variant. Related 1MRK000167 series boards include GCR00, GBR00, GDR00 and other suffix revisions, each matched to a specific Relion IED, relay function and hardware index. The HDR00 suffix identifies this particular PCB revision and configuration.

Product Function and System Role

The board is a purpose-designed logic or interface card installed inside an ABB protection and control intelligent electronic device, commonly associated with the Relion 670 series family such as RET670 transformer protection, REL670 line distance protection or REC670 control and protection IEDs. It performs internal signal conditioning, backplane bus communication, control logic or interface functions within the relay assembly. It is not a standalone universal PLC I/O module, power supply, HMI panel or field protection relay; it is a replacement spare board mounted inside the host IED chassis.

Hardware and Interface Characteristics

Related 1MRK000167 series boards are industrial control PCBs mounted through a chassis slot edge connector or screw fastening into the host relay backplane. Onboard features commonly include status LEDs for run or error indication, configuration or identity memory, watchdog supervision, filtering on I/O lines and gold-plated backplane connectors. The board bridges the host IED backplane with internal or auxiliary circuits according to the relay design, and its firmware or hardware revision must match the host chassis and relay type.

Supply and Environmental Context

Related ABB protection relay boards typically operate from the relay internal or 24 V DC system supply, with power consumption in the low-watt range for an internal control card. Operating and storage temperatures follow the Relion IED cabinet or panel environment. Exact supply voltage, isolation rating, power consumption, board dimensions and terminal assignment for the HDR00 variant must be verified from the ABB relay drawing, spare part record or engineering manual, because 1MRK000167 suffix variants differ by function and revision.

Typical Application Scenarios

This board appears in legacy or maintained ABB protection relay installations in substations, industrial power systems, generator protection, transformer bays, feeder protection and process plant electrical distribution. It is used when an original relay internal PCB develops communication faults, logic errors, intermittent internal bus failures or damaged interface circuits, and the maintenance team replaces the board rather than replacing the complete IED. Common situations include post-fault maintenance, storm or surge damage, cabinet refurbishment and long-term spare part support for proven protection assets.

Installation and Replacement Notes

Board replacement should follow the ABB relay manual, substation safety procedures and ESD requirements. Before removal, record the relay type, software version, board suffix, index number and any configuration or identity information. Power down the IED, remove the failed board, insert the matching HDR00 revision board into the correct slot, and verify connector seating and retaining hardware. After power-up, confirm that the relay self-test passes, internal communication is normal, board identity is recognized, and protection or control functions remain available. Any firmware or configuration mismatch should be corrected through the applicable ABB engineering tool before returning the relay to service.

Advantages and Selection Notes

The 1MRK000167-HDR00 board provides a matched internal spare card for ABB Relion or legacy protection relay assemblies, allowing targeted board replacement instead of full IED replacement. Because this is an older protection system spare, availability may be limited to new surplus, refurbished or used stock. When selecting a replacement, confirm the full board designation 1MRK000167-HDR00, spare index 1MRK000005-262, host relay model, board slot, revision level and software compatibility. The board is an internal relay PCB, not a complete protection relay, controller, power supply or field sensor; its role is to support the internal logic or interface operation of the host ABB protection IED.


Get a Quote