ABB MTQ22-FBF.0 1SAJ260000R0100 Product Description

Overview

ABB MTQ22-FBF.0 1SAJ260000R0100 is presented as an ABB Ethernet communication interface module for the UMC100.3 universal motor controller system. Official ABB and public distributor records identify product 1SAJ260000R0100 as model MTQ22-FBP.0, a Modbus TCP interface for up to 4 UMC100.3 motor controllers. The supplied suffix FBF.0 differs from the confirmed catalog model FBP.0; the description below uses the confirmed ABB record for 1SAJ260000R0100 and marks any suffix-specific function for verification against the module label.

Features

The MTQ22-FBP.0 Ethernet communication module supports the Modbus TCP network protocol and allows connection of up to four UMC100.3 motor controllers to an Ethernet control network. The module can be mounted on a DIN rail. Public ABB motor-controller references describe the Ethernet interface with integrated switch, redundant ring network topology support according to IEC/EN 62439-2, configuration by PC and support for up to four configurable and supervised masters.

The module uses rated control supply voltage 24 V DC and power loss approximately 3.5 W. Protection is IP20. It mounts to TH35-15 or TH35-7.5 DIN rail according to IEC 60715, with any mounting position permitted. Product net dimensions are width 45 mm, depth or length 96 mm, height 90 mm, and net weight 0.172 kg.

The ABB record lists suitable use with UMC100 motor controllers and standards including CAN/CSA C22.2 No.142, IEC/EN 61131-2 and UL 508. Customs or commodity code listed by ABB is 85176200. Recommended screwdriver is Pozidriv 1. Because the supplied model is written MTQ22-FBF.0 while the confirmed 1SAJ260000R0100 record is MTQ22-FBP.0, verify the exact Ethernet protocol, connector arrangement, device count and firmware revision against the physical module label and ABB documentation.

Specs

Brand: ABBProduct family: MTQ22 FBP fieldbus plug or Ethernet communication interface Supplied model: MTQ22-FBF.0Confirmed catalog model for part number: MTQ22-FBP.0Product ID: 1SAJ260000R0100EAN: 4013614480317Product category: Ethernet communication interface; fieldbus communication module Compatible system: UMC100.3 / UMC100 universal motor controllers Network protocol: Modbus TCP per confirmed MTQ22-FBP.0 record Connected devices: Up to 4 motor controllers Mounting: DIN rail, any position DIN rail: TH35-15 or TH35-7.5, IEC 60715 Rated control supply voltage: 24 V DCPower loss: Approximately 3.5 WProtection: IP20Pollution degree: 3Product net width: 45 mmProduct net depth or length: 96 mmProduct net height: 90 mmProduct net weight: 0.172 kgStandards: CAN/CSA C22.2 No.142, IEC/EN 61131-2, UL 508 Commodity code: 85176200Recommended screwdriver: Pozidriv 1 Exact suffix meaning: Verify FBF.0 versus confirmed FBP.0 on label and ABB record

Principle

The MTQ22-FBP.0 module acts as an Ethernet gateway between ABB UMC100.3 motor controllers and a Modbus TCP control network. The UMC100.3 controllers monitor motor protection, control and measurement functions; the MTQ22 interface exchanges controller status, measurements, settings and control data with PLCs, SCADA, HMIs, engineering PCs or higher-level automation systems over Ethernet.

The integrated Ethernet switch supports local network cabling and redundant ring topology where configured according to the relevant industrial network standard. Configuration can be performed through a PC connection or engineering interface according to ABB UMC100.3 tools. The module receives 24 V DC control supply and communicates with the motor controllers through the local FBP device connection or UMC controller bus arrangement.

Replacement should verify the original module model, part number, protocol, number of connected UMC controllers, device addresses, Ethernet IP configuration, network topology, cable type, connector wiring, supply voltage and firmware or parameter backup. Because the supplied suffix may differ from the confirmed catalog model, replacement compatibility should be checked before commissioning rather than assumed from the part number alone.

Applications

ABB MTQ22-FBF.0 1SAJ260000R0100 is used in existing ABB UMC100.3 motor-control installations for Modbus TCP communication between motor controllers and PLC, SCADA, HMI or industrial Ethernet networks. Typical applications include motor control centers, low-voltage switchgear, process plants, manufacturing lines, pumping systems, fans, compressors, conveyors, material handling, water and wastewater, utilities and general industrial automation. In legacy systems, the module serves as a direct replacement communication spare when the compatible UMC controller system, protocol, device count, supply voltage and network configuration match the original installation.