GE FANUC VERSAMAX IC200UDR005-CJ VersaMax Micro PLC Controller

OverviewGE FANUC VERSAMAX IC200UDR005-CJ is a 28-point integrated micro PLC from the GE Fanuc VersaMax Micro series, the suffix CJ denotes the specific revision version of this unit. GE FANUC VERSAMAX IC200UDR005-CJ integrates CPU, power supply, built-in I/O and serial communication ports in one compact housing. It has 16 channels of 24VDC digital inputs, 11 normally open relay outputs and 1 independent 24VDC output, powered by 100–240V AC universal supply. This controller supports up to 4 expansion modules to extend total I/O capacity. It supports Modbus RTU and SNP protocols for programming and data exchange with HMI, other PLCs and host systems. In packaging, material handling and small pumping station automation projects, GE FANUC VERSAMAX IC200UDR005-CJ performs stable sequence control and logic interlock, and it is a widely stocked classic imported compact PLC spare.

FeaturesGE FANUC VERSAMAX IC200UDR005-CJ adopts standard DIN rail mounting structure, compact size for cabinet space saving. The VersaMax Micro PLC Controller has a fast logic scan speed and rich instruction set for motion, counting and timing tasks. Relay output channels can drive AC and DC loads with good load adaptability. Dual serial communication ports support programming and slave communication simultaneously. It supports online program modification and memory module backup for quick program restoration. The unit includes built-in diagnostic functions for I/O status and power monitoring. GE FANUC VERSAMAX IC200UDR005-CJ conforms to industrial EMC standards, suitable for workshop environments with moderate interference, and it can be matched with VersaMax I/O expansion modules freely.

SpecsGE FANUC VERSAMAX IC200UDR005-CJ 28-point integrated micro controller. The VersaMax Micro PLC Controller power supply: 100–240V AC. Digital input: 16 × 24VDC. Output: 11 × relay NO, 1 × 24VDC. Max expansion: 4 expansion units. Communication: RS232 / RS485, Modbus RTU, SNP. Installation: DIN rail mounting. Revision code: CJ. It is stocked as compact logic control spare.

Operating ParametersGE FANUC VERSAMAX IC200UDR005-CJ ambient operating temperature: 0℃ ~ +55℃. The VersaMax Micro PLC Controller relative humidity: 5%~95% non-condensing. Relay contact rating: 2A per point resistive load. Input signal: 7.5mA typical at 24VDC. EMC: comply with industrial IEC standards. Storage temperature: -40℃ ~ +85℃.

PrincipleGE FANUC VERSAMAX IC200UDR005-CJ reads the status of field sensors and switches through the built-in DC input terminals. The VersaMax Micro PLC Controller executes user logic program cyclically, then drives relay or DC output channels to actuate contactors, solenoid valves and indicators. Communication ports exchange data with upper devices via Modbus or SNP. Internal self-diagnosis circuit monitors power supply and I/O channel faults. When program error or hardware abnormality occurs, GE FANUC VERSAMAX IC200UDR005-CJ will enter fault state and stop output or go to predefined safe state.

ApplicationsGE FANUC VERSAMAX IC200UDR005-CJ is widely deployed in packaging machines, conveyor lines, small water treatment skids, furnace auxiliary control and general machine automation. The VersaMax Micro PLC Controller undertakes sequence logic, interlock protection and simple closed-loop control. It cooperates with sensors, contactors, HMIs and expansion modules to form independent small automation control systems. GE FANUC VERSAMAX IC200UDR005-CJ is a preferred imported spare for renovation and maintenance of small-scale automation equipment.