ELGO ELECTRONIC IZ15E-031-3-005-0 Battery-powered Magnetic Position Indicator

Overview

The ELGO ELECTRONIC IZ15E-031-3-005-0 is a panel-mounted battery-operated magnetic position indicator from the ELGO IZ15E series. The ELGO ELECTRONIC IZ15E-031-3-005-0 works with an external incremental magnetic sensor and magnetic tape to realize non-contact linear or angular position measurement. It reads position signals from the magnetic sensor and displays the actual dimension value on the local LCD screen, supporting mm / inch switching, offset setting, chain dimension function and preset target for mechanical positioning. The ELGO ELECTRONIC IZ15E-031-3-005-0 is widely stocked as spare digital readout unit for woodworking machines, metal cutting equipment, bending machines and manual positioning stops.

Features

The ELGO ELECTRONIC IZ15E-031-3-005-0 is powered by a single 1.5V battery and keeps position data retention after power-off. It supports resolution selection down to 0.01 mm, with maximum tracking speed up to 2.5 m/s for the matched magnetic sensor. The ELGO ELECTRONIC IZ15E-031-3-005-0 integrates keypad for local parameter configuration, reference reset, tolerance alarm and unit conversion. It adopts snap-in panel installation without extra fixing hardware, and the front panel complies with IP43 protection rating for workshop dust and splash resistance. The ELGO ELECTRONIC IZ15E-031-3-005-0 matches ELGO magnetic tape MB20 series and rotary magnetic rings for straight travel or rotary angle feedback. The suffix code defines cable configuration, decimal resolution and housing variant of this IZ15E unit.

Specs

Device Type: Battery powered magnetic position indicator Model: ELGO ELECTRONIC IZ15E-031-3-005-0 Series: IZ15E Sensor Type: Incremental magnetic sensor (external) Power Supply: 1.5V battery Display: LCD digital display Max Tracking Speed: 2.5 m/s Unit: mm / inch switchable Mounting: Snap-in panel cutout Protection Grade: IP40 front panel Operating Temperature: 0°C ~ +50°C Application: Saw machine, bending machine, drilling stop, woodworking machinery, manual positioning gauge

Principle

The ELGO ELECTRONIC IZ15E-031-3-005-0 receives incremental magnetic pulse signals from the moving sensor head scanning the magnetic tape. The internal counter accumulates pulse counts and converts the pulse quantity into linear or angular position value. The operator can set target dimension and offset value on the keypad. When the measured position reaches the set target, the indicator provides visual prompt. The ELGO ELECTRONIC IZ15E-031-3-005-0 monitors sensor signal loss and triggers fault indication when the magnetic sensor is disconnected.

Applications

The ELGO ELECTRONIC IZ15E-031-3-005-0 is used for position readout and stop positioning on woodworking machines, metal bending equipment and cutting machinery. It serves wear-free length measurement for production workshops without external 24V power supply. The ELGO ELECTRONIC IZ15E-031-3-005-0 applies to spare stock and emergency replacement of legacy ELGO magnetic measuring systems. It also supports machine retrofit and dimension setting re-calibration projects.