PHOENIX CONTACT TP 07T/M211 2701452-04 Thermal Printer Module

Overview

The PHOENIX CONTACT TP 07T/M211 2701452-04 is a compact thermal printer module developed by Phoenix Contact, designed for industrial control cabinets, DCS and recorder systems to print process logs, alarm messages and batch records. The PHOENIX CONTACT TP 07T/M211 2701452-04 accepts serial print commands from the host controller via RS232 or RS485 interface, and prints text and simple graphics on thermal paper without ink ribbon. It is widely stocked as spare replacement for legacy recording and alarming assemblies in water treatment, chemical and power automation systems.

Features

The PHOENIX CONTACT TP 07T/M211 2701452-0G supports stable thermal dot-line printing with adjustable print density and print speed. It integrates paper end detection, cover open detection and over-temperature protection for the print head. The PHOENIX CONTACT TP 07T/M211 2701452-04 supports standard ASCII character set and custom character mapping, and can be controlled by simple serial command protocols. It uses replaceable thermal paper roll and front paper loading structure for convenient on-site maintenance. The PHOENIX CONTACT TP 07T/M211 2701452-04 adopts vertical panel mounting and matches the original pin definition of the TP series printer family.

Specs

Device Type: Industrial thermal printer module Model: PHOENIX CONTACT TP 07T/M211, Order No. 2701452-04 Printing Technology: Direct thermal printing Interface: Serial RS232 / RS485 Paper Width: 58 mm Power Supply: 24 V DC Detection: Paper end sensor, cover open sensor Print Head: High life thermal dot head Mounting: Panel cutout installation Protection Grade: IP20 Application: DCS recorder, alarm logger, batch record printing, industrial cabinet local logging

Principle

The PHOENIX CONTACT TP 07T/M211 2701452-04 receives serial print data and control commands from the upper control system. The internal drive circuit heats the corresponding points on the thermal print head. The thermal paper changes color under heating to form text and graphic content. The printer continuously monitors paper status and print head temperature. When paper runs out, cover is opened or print head overheats, the PHOENIX CONTACT TP 07T/M211 2701452-04 sends fault feedback signal to the host controller and stops printing.

Applications

The PHOENIX CONTACT TP 07T/M211 2701452-04 is used for on-site alarm logging and event recording in chemical plants, water treatment stations and power plant DCS control rooms. It serves batch report printing for process production lines that need hard-copy trace records. The PHOENIX CONTACT TP 07T/M211 2701452-04 applies to spare stock and emergency repair of existing Phoenix TP series thermal printer assemblies. It also supports renovation of old recording cabinets.