1. General Description

2. Hydraulic Specifications

• Mounting: ISO 4401 Size 05 (NG10)

• Max working pressure (P, A, B): 350 bar (5,000 psi)

• T‑port pressure: 50 bar (without Y‑port); 350 bar (with Y‑port)

• Rated flow (Δp = 35 bar per land): 120 L/min (31.7 gpm)

• Maximum flow: approx. 220 L/min (58.1 gpm)

• Internal leakage: ≤ 1.0 L/min

• Fluid: Mineral oil (ISO 11158 / DIN 51524)

• Fluid temperature: −20 °C to +80 °C

• Filtration: ISO 4406 17/14/11 or better

• Weight: approx. 6.5 kg (14.3 lb)

3. Dynamic Performance (Typical)

• Step response (0 → 100% stroke): ≤ 22 msMoog Inc.

• −3 dB bandwidth: 55–65 Hz

• Hysteresis: < 0.5% of full scale

• Resolution: < 0.1% of full scale

• Null drift (60 K temp change): < 1.5% of full scale

4. Electrical Specifications

• Supply voltage: 24 VDC (18–32 VDC)Moog Inc.

• Max operating current: 3.5 A

• Command signal (jumper selectable): ±10 V, ±10 mA, 4–20 mAMoog Inc.

• Spool position feedback output: 0–10 VDC

• Connector: M18, 6 pins + PE, IP65Moog Inc.

• Ambient temperature: −20 °C to +60 °C

• EMC: CE compliant

5. Key Features

• Ultra‑high‑flow direct drive: 120 L/min rated, no pilot supply needed

• Integrated LVDT closed‑loop: good linearity and repeatability

• Pressure‑independent dynamics: stable under heavy, varying loads

• Higher leakage design: optimized for maximum flow, not minimal leakage

• Spring‑centered fail‑safe: safe shutdown on power loss

6. Applications

• Ultra‑high‑flow hydraulic axes

• Heavy‑duty presses & large industrial machinery

• High‑capacity injection molding & die‑casting machines

• Large‑scale material testing & fatigue systems

• General‑purpose high‑flow closed‑loop control

7. Wiring Definition

• Pin 1: +24 VDC

• Pin 2: Power ground

• Pin 3: Command signal (+)

• Pin 4: Command signal (−)

• Pin 5: Spool position feedback (0–10 VDC)

• Pin 6: Feedback ground

• PE: Protective earth

• Recommendation: Use shielded twisted‑pair cable for signals.