760C913A
Description
1.1 Description
1.2 Key Applications
Resolution verification (2–20 LP/mm)
Contrast sensitivity assessment
Beam uniformity & artifact inspection
Geometric accuracy & alignment checks
Mammography system calibration
2. Safety & Compliance
Warning: For professional use only by qualified medical physics/radiology staff.
Follow facility radiation safety protocols; avoid overexposure.
Comply with IEC 61223, FDA, and local regulatory standards.
CE marked, NIST-traceable calibrated.
3. Specifications
| Parameter | Value |
|---|---|
| Material | Radiopaque/radiolucent medical-grade polymer |
| Test Patterns | Line pairs, bar targets, low-contrast inserts, alignment marks |
| Dimensions (L×W×H) | 22 cm × 18 cm × 3.0 cm |
| Weight | ~1.5 kg |
| Operating Temp | 15–35°C |
| Storage Temp | -10–50°C |
| Compatibility | X-ray, fluoroscopy, mammography (2D) |
4. Operating Instructions
4.1 Setup
Place phantom centered on the patient table/cassette holder.
Align reference marks with the X-ray central ray.
Set exposure parameters (kVp, mAs, SID) per protocol.
4.2 Test Workflow
Resolution: Expose line-pair grid; record smallest resolvable LP/mm.
Contrast: Image low-contrast bars; identify thinnest visible bar.
Uniformity: Inspect for uneven density, noise, or artifacts.
Geometry: Verify alignment and dimensional accuracy.
5. Maintenance
Cleaning: Wipe with mild non-abrasive disinfectant; avoid harsh chemicals.
Storage: Keep in dry, dust-free case at room temperature.
Inspection: Check for cracks/scratches quarterly; replace if damaged.
Calibration: Annual recalibration recommended (NVLAP-accredited lab).
6. Warranty & Support
Warranty: 2-year limited warranty against defects.
Contact: Fluke Biomedical | Cleveland, OH | +1-440-498-2564 | www.flukebiomedical.com
Get a Quote