1. Product Overview

2. Key Features

1. Dual Protocol Master: EtherNet/IP Scanner (Client/Server) + PROFIBUS DPV1 Master (IEC 61158)

2. High Slave Capacity: Supports up to 12 PROFIBUS DPV1 slave devices

3. EtherNet/IP I/O: Implicit/explicit messaging, up to 256 bytes cyclic data

4. PROFIBUS Speed: 9.6 kbps to 12 Mbps, auto-baud detection

5. Data Mapping: Tag-based EtherNet/IP ↔ PROFIBUS register mapping, no PLC programming required

6. Web Server: Built-in HTML web interface for configuration, diagnostics, and firmware updates

7. Industrial Isolation: Electrical isolation between Ethernet and PROFIBUS ports

8. Diagnostics: Real-time status, error logging, and network statistics

9. Redundancy: Supports redundant 24VDC power inputs

10. Wide Temp: -20°C to +60°C operating range for harsh environments

3. Technical Specifications

3.1 Power Supply

• Rated Voltage: 24 VDC

• Range: 18–36 VDC

• Max Power: ≤15 W

• Redundancy: Dual power terminals

3.2 EtherNet/IP Interface

• Speed: 10/100 Mbps auto-negotiation

• Connector: RJ45

• Modes: Scanner (Client), Adapter (Server)

• Data Size: Up to 256 bytes cyclic I/O

3.3 PROFIBUS DPV1 Interface

• Role: DPV1 Master (Class 1 & 2)

• Connector: DB9 female

• Baud Rate: 9.6k–12 Mbps

• Slaves: Up to 12 DPV1 slaves

• Protocols: DP-V0, DP-V1, FMS

3.4 Environmental

• Operating Temp: -20°C to +60°C

• Storage Temp: -40°C to +85°C

• Humidity: 5%–95% RH, non-condensing

• Vibration: IEC 60068-2-6 compliant

3.5 Physical

• Mounting: 35 mm DIN rail

• Dimensions: 132 × 52.6 × 115 mm

• Weight: ~860 g

• Certifications: CE, UL, ATEX, GOST-R

4. LED Indicators

• PWR: On = Power OK

• RUN: Blinking = Normal operation

• ENET: Blinking = EtherNet/IP activity

• PBUS: Blinking = PROFIBUS activity

• ERR: On = Fault (config/comm error)

5. Installation & Wiring

1. Mount securely on DIN rail in cabinet.

2. Connect 24VDC to power terminals (redundant recommended).

3. Connect Ethernet cable to RJ45 port for EtherNet/IP.

4. Connect PROFIBUS cable to DB9 port; use standard PROFIBUS wiring.

5. Set PROFIBUS slave addresses and baud rate via web interface.

6. Configure EtherNet/IP IP, subnet, and data mapping.

7. Save config, reboot, and verify communication.

6. Communication Functions

1. EtherNet/IP → PROFIBUS: Write data from EtherNet/IP tags to PROFIBUS slave registers.

2. PROFIBUS → EtherNet/IP: Read slave data and map to EtherNet/IP tags.

3. DPV1 Services: Support for acyclic DPV1 data (diagnostics, alarms).

4. Network Bridging: Connect Rockwell PLCs to Siemens PROFIBUS devices without middleware.

5. Data Integrity: Cyclic data with watchdog and error handling.

7. Applications

1. Cross-Platform Integration: Connecting Allen‑Bradley (EtherNet/IP) and Siemens (PROFIBUS) systems.

2. Legacy System Upgrades: Integrating existing PROFIBUS equipment into modern EtherNet/IP architectures.

3. Factory Modernization: Automotive, food & beverage, and packaging lines.

4. Process Control: Chemical, water treatment, and pharmaceutical plants.

5. Machine Networking: CNC machines, drives, and I/O stations over PROFIBUS.

8. Safety Notes

1. Power Off: Wire only when power is disconnected.

2. Cable Quality: Use shielded cables for both Ethernet and PROFIBUS.

3. Grounding: Properly ground the gateway and devices to avoid ESD.

4. Parameter Matching: Ensure baud rate and slave addresses match on the PROFIBUS bus.

5. Environment: Avoid direct sunlight, moisture, and strong EMI sources.