MOOG D662-4005 Special secondary jet pipe servo valve for injection molding (same as 4002 in the same series, 40XX plastic machine valve body)MOOG D662-4005 Special Secondary Jet Pipe Servo Valve for_Ningde Androld Automation Equipment Co.,Ltd.

June 05, 2026

MOOG D662-4005 Special secondary jet pipe servo valve for injection molding (same as 4002 in the same series, 40XX plastic machine valve body)MOOG D662-4005 Special Secondary Jet Pipe Servo Valve for

I. Model Explanation D662: Secondary ServoJet jet pipe, built-in LVDT electrical feedback + integrated drive board; 4005 = Injection molded custom valve body code (flow / neutral / oil port configuration) 40XX Series: Full range of injection molding machine-specific specification segments (jetting / melting / pressure-closed loop), installed with unified ISO4401-07 (NG16) flange installation, and compatible with D662-4002 installation base plate

Description

II. Core Hydraulic Parameters

Rated Flow Rate: 200L/min @ΔP=7MPa (single chamber pressure difference 70bar) (40L/min higher than 4002)

System Working Pressure: Standard 21MPa (210bar), Maximum Pressure Resistance 35MPa (350bar)

Pilot Type: Internal Control Pilot (comes with X/Y internal control oil, no need for external control oil), Double T Return Ports

Valve Core Function: O-type Zero Opening Linear Valve Core, Low Leakage at Zero Position, Suitable for Dual Closed-loop of Pressure and Flow

III. Electrical Parameters (Fully Compatible with D662-4002)

Power Supply: DC24V (18～32VDC wide voltage range), Power Amplifier Board Built-in in Valve Body

Standard Control Commands: ±10VDC Analog Voltage (4～20mA Current Input is optional)

Feedback: Built-in LVDT Electrical Closed-loop Feedback (Same as D-Suffix E Electrical Feedback Principle)

Full Stroke Step Response: 11～14ms (21MPa System Pressure), Excellent High-Frequency Dynamic Performance

Contact Info