1. Part Number Decoding

• 330180: Base model for 3300 XL 8mm Proximitor (50 Ω)

• X0:

  • X: Standard temperature (non-ETR)

  • 0: Panel mount (no DIN rail clip)

• 00: 0-meter system length (probe connects directly; no extension cable)

2. Technical Specifications

• Impedance: 50 Ω (must match probe/extension cable)

• Power Supply: -17.5 to -26 VDC (typ. -24 VDC, ≤12 mA)

• Sensitivity: 7.87 mV/μm (200 mV/mil)

• Linear Range: 0.25 mm to 2.3 mm (10–90 mils)

• Frequency Response: 0 to 10 kHz

• Operating Temp (Proximitor): -35 °C to +100 °C

• Output: Negative DC voltage proportional to gap (static + dynamic)

• Mounting: Panel mount (4-hole footprint, compatible with legacy designs)

• Dimensions: 81.3 × 35.1 × 63.5 mm

• Weight: ~0.246 kg

3. Compatible Components (0m System)

• Probe: 330191-00-26-10-00 (8mm, standard temp, 1m integral cable)

• Extension Cable: None (0m system; probe connects directly to Proximitor)

• Monitor: 3500/40 (shaft vibration), 3500/42 (axial position)

4. Application

• X0 (Panel Mount): Traditional control cabinet panel installation (no DIN rail)

• Standard Temperature: Probe area ≤100 °C (non-high-temperature zones)

• 0m Length: Short-distance mounting (probe near Proximitor; no extension cable needed)

• Machinery: Turbines, compressors, fans, motors, pumps (non-ETR zones)

5. Installation Notes

• 50 Ω Matching: Use only 50 Ω probes/cables (do not mix 75 Ω)

• Recommended Gap: 1.27 mm (50 mils, ~-9 VDC)

• Cable Handling: Do not cut cables; avoid tight bends

• Shield Grounding: Single-point ground at cabinet end

• Ambient Temp: Proximitor ≤60 °C; keep away from heat sources