I. Model Explanation (330180-X0-05)

330180: 3300 XL 8mm Preamplifier Base Model (50Ω)

X0:

X: Standard Temperature Version (not ETR High Temperature)

0: Panel Mount (Panel Mount), without DIN Rail Mounting Components

05: System Total Length 5m (Probe Cable + Extension Cable Total 5m)

The key differences from your previous X1/X2:

X0 = Panel Mount (Opening Fixed)

X1 = DIN Rail Mounting (Standard Temperature)

X2 = DIN Rail Mounting (ETR High Temperature)

II. Core Parameters (X0-05, Panel + Standard Temperature + 5m)

Adapter Probe: 330191 Standard Temperature 8mm Probe (50Ω)

Adapter Extension Cable: 330190 Series 5m (50Ω)

System Impedance: 50Ω (Must be Fully Matched)

Power Supply: -17.5 to -26VDC (Typical -24VDC, ≤12mA)

Sensitivity: 7.87mV/μm (200mV/mil)

Linear Range: 0.25 to 2.3mm

Frequency Response: 0 to 10kHz

Operating Temperature (Preamplifier): -35℃ to +100℃ (Standard Temperature)

Output: Negative Voltage Proportional to Gap (Static + Dynamic)

Installation Method: Panel Mount (4 Hole Fixed), Compatible with Older Models

Size: Approximately 81×35×58mm; Weight Approximately 0.25kg

III. Typical Combinations (5m Standard Temperature, Panel Mount System)

Probe: 330191-00-26-10-00 (Includes 1m Cable, Standard Temperature)

Extension Cable: 330190-040-00-00 (4m, Total 5m)

Preamplifier: 330180-X0-05 (5m, Panel, Standard Temperature)

Monitoring Module: 3500/40 (Axial Vibration), 3500/42 (Axial Displacement)

IV. Application Scenarios

X0 (This Model):

Traditional Control Panel Opening Installation, No DIN Rail Required

General Industrial Environment, Probe Temperature ≤ 100℃

Steam Turbines, Compressors, Fans, Motors, Pumps, etc. (Non-High Temperature Areas)

X1: Same Environment, but Requires Dense DIN Rail Installation

X2: High Temperature Area (100 to 232℃), Must Be Equipped with ETR High Temperature Probe

V. Installation Tips

Must be 50Ω Fully Matched: Probe / Extension Cable / Preamplifier Cannot Be Mixed 75Ω

Reference Gap: 1.27mm (50mil)

Cables Cannot Be Cut, Avoid Small Radius Curves

Shield Layer Grounding on the Side of the Control Cabinet

Preamplifier Operating Temperature ≤ 60℃, Away from Heat Sources